-= Device Codes for AVRprog ver1.35 =-

Checked one by one @ 6/1/2004
by Kyriakos Kontakos(kkontak@hotmail.com)

AVRprog ver1.35 supports the codes listed only.
The rest of the 256 codes were not recognized.

These values may be used in appnote
AVR910(as a HW programmer interface)
or in bootloaders in individual AVRs.
AVRprog(part of AVRStudio) should be
used as windows application interface
for both uses.

DeviceCode,RecognizedAs
-------------------------------
0x10,AT90S1200 rev. A
0x11,AT90S1200 rev. B
0x12,AT90S1200 rev. C
0x13,AT90S1200
0x20,AT90S2313
0x28,AT90S4414
0x30,AT90S4433
0x34,AT90S2333
0x38,AT90S8515
0x3A,ATmega8515
0x3B,ATmega8515 BOOT
0x41,ATmega103
0x42,ATmega603
0x43,ATmega128
0x44,ATmega128 BOOT
0x48,AT90S2323
0x4C,AT90S2343
0x50,ATtiny11
0x51,ATtiny10
0x55,ATtiny12
0x56,ATtiny15
0x58,ATtiny19
0x5C,ATtiny28
0x5E,ATtiny26
0x60,ATmega161
0x61,ATmega161 BOOT
0x64,ATmega163		;previous false value was 0x62!
0x65,ATmega83
0x66,ATmega163 BOOT
0x67,ATmega83 BOOT
0x68,AT90S8535
0x6C,AT90S4434
0x70,AT90C8534
0x71,AT90C8544
0x72,ATmega32
0x73,ATmega32 BOOT
0x74,ATmega16
0x75,ATmega16 BOOT
0x76,ATmega8
0x77,ATmega8 BOOT
0x80,AT89C1051
0x81,AT89C2051
0x86,AT89S8252
0x87,AT89S53