void Display_Init (void)
{

	PORTA = PORTA | 0x05;							//Baudrate eingestellt				 
	DDRE = DDRE | 0x02;							//TxD -> Ausgang
	PORTE = PORTE | 0x01;							//RxD Pull-Up aktiviert 
}

void Ausgabe_Wert (void)
{
	unsigned char uclen = 0;
	unsigned char ucbcc = 0;
	unsigned char i;

	sprintf (&ucDEBUG_Buffer, "#DL");

	uclen = strlen(&ucDEBUG_Buffer);		
	ucbcc = 17 + uclen;

	UART_schreiben_Sendebuffer (0x11);

	UART_schreiben_Sendebuffer (uclen);
	
	for (i = 0; i < uclen; i ++)
	{
		ucbcc = ucbcc + ucDEBUG_Buffer [i];
		UART_schreiben_Sendebuffer (ucDEBUG_Buffer [i]);
	}

	UART_schreiben_Sendebuffer (ucbcc);
}