;***** THIS IS A MACHINE GENERATED FILE - DO NOT EDIT ********************
;***** Created: 2010-08-20 14:22 ******* Source: ATtiny4313.xml **********
;*************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number            : AVR000
;* File Name         : "tn4313def.inc"
;* Title             : Register/Bit Definitions for the ATtiny4313
;* Date              : 2010-08-20
;* Version           : 2.35
;* Support E-mail    : avr@atmel.com
;* Target MCU        : ATtiny4313
;* 
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register 
;* names and I/O register bit names appearing in the data book can be used.
;* In addition, the six registers forming the three data pointers X, Y and 
;* Z have been assigned names XL - ZH. Highest RAM address for Internal 
;* SRAM is also defined 
;* 
;* The Register names are represented by their hexadecimal address.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc"
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in    r16,PORTB             ;read PORTB latch
;* sbr   r16,(1<<PB6)+(1<<PB5) ;set PB6 and PB5 (use masks, not bit#)
;* out   PORTB,r16             ;output to PORTB
;* 
;* in    r16,TIFR              ;read the Timer Interrupt Flag Register
;* sbrc  r16,TOV0              ;test the overflow flag (use bit#)
;* rjmp  TOV0_is_set           ;jump if set
;* ...                         ;otherwise do something else
;*************************************************************************

#ifndef _TN4313DEF_INC_
#define _TN4313DEF_INC_


#pragma partinc 0

; ***** SPECIFY DEVICE ***************************************************
.device ATtiny4313
#pragma AVRPART ADMIN PART_NAME ATtiny4313
.equ	SIGNATURE_000	= 0x1e
.equ	SIGNATURE_001	= 0x92
.equ	SIGNATURE_002	= 0x0d

#pragma AVRPART CORE CORE_VERSION V2
#pragma AVRPART CORE NEW_INSTRUCTIONS lpm rd,z+


; ***** I/O REGISTER DEFINITIONS *****************************************
; NOTE:
; Definitions marked "MEMORY MAPPED"are extended I/O ports
; and cannot be used with IN/OUT instructions
.equ	SREG	= 0x3f
.equ	SPL	= 0x3d
.equ	SPH	= 0x3e
.equ	OCR0B	= 0x3c
.equ	GIMSK	= 0x3b
.equ	EIFR	= 0x3a
.equ	TIMSK	= 0x39
.equ	TIFR	= 0x38
.equ	SPMCSR	= 0x37
.equ	OCR0A	= 0x36
.equ	MCUCR	= 0x35
.equ	MCUSR	= 0x34
.equ	TCCR0B	= 0x33
.equ	TCNT0	= 0x32
.equ	OSCCAL	= 0x31
.equ	TCCR0A	= 0x30
.equ	TCCR1A	= 0x2f
.equ	TCCR1B	= 0x2e
.equ	TCNT1L	= 0x2c
.equ	TCNT1H	= 0x2d
.equ	OCR1AL	= 0x2a
.equ	OCR1AH	= 0x2b
.equ	OCR1BL	= 0x28
.equ	OCR1BH	= 0x29
.equ	CLKPR	= 0x26
.equ	ICR1L	= 0x24
.equ	ICR1H	= 0x25
.equ	GTCCR	= 0x23
.equ	TCCR1C	= 0x22
.equ	WDTCR	= 0x21
.equ	PCMSK	= 0x20
.equ	EEAR	= 0x1e
.equ	EEDR	= 0x1d
.equ	EECR	= 0x1c
.equ	PORTA	= 0x1b
.equ	DDRA	= 0x1a
.equ	PINA	= 0x19
.equ	PORTB	= 0x18
.equ	DDRB	= 0x17
.equ	PINB	= 0x16
.equ	GPIOR2	= 0x15
.equ	GPIOR1	= 0x14
.equ	GPIOR0	= 0x13
.equ	PORTD	= 0x12
.equ	DDRD	= 0x11
.equ	PIND	= 0x10
.equ	USIDR	= 0x0f
.equ	USISR	= 0x0e
.equ	USICR	= 0x0d
.equ	UDR	= 0x0c
.equ	UCSRA	= 0x0b
.equ	UCSRB	= 0x0a
.equ	UBRRL	= 0x09
.equ	ACSR	= 0x08
.equ	BODCR	= 0x07
.equ	PRR	= 0x06
.equ	PCMSK2	= 0x05
.equ	PCMSK1	= 0x04
.equ	UCSRC	= 0x03
.equ	UBRRH	= 0x02
.equ	DIDR	= 0x01


; ***** BIT DEFINITIONS **************************************************

; ***** PORTB ************************
; PORTB - Port B Data Register
.equ	PORTB0	= 0	; Port B Data Register bit 0
.equ	PB0	= 0	; For compatibility
.equ	PORTB1	= 1	; Port B Data Register bit 1
.equ	PB1	= 1	; For compatibility
.equ	PORTB2	= 2	; Port B Data Register bit 2
.equ	PB2	= 2	; For compatibility
.equ	PORTB3	= 3	; Port B Data Register bit 3
.equ	PB3	= 3	; For compatibility
.equ	PORTB4	= 4	; Port B Data Register bit 4
.equ	PB4	= 4	; For compatibility
.equ	PORTB5	= 5	; Port B Data Register bit 5
.equ	PB5	= 5	; For compatibility
.equ	PORTB6	= 6	; Port B Data Register bit 6
.equ	PB6	= 6	; For compatibility
.equ	PORTB7	= 7	; Port B Data Register bit 7
.equ	PB7	= 7	; For compatibility

; DDRB - Port B Data Direction Register
.equ	DDB0	= 0	; Port B Data Direction Register bit 0
.equ	DDB1	= 1	; Port B Data Direction Register bit 1
.equ	DDB2	= 2	; Port B Data Direction Register bit 2
.equ	DDB3	= 3	; Port B Data Direction Register bit 3
.equ	DDB4	= 4	; Port B Data Direction Register bit 4
.equ	DDB5	= 5	; Port B Data Direction Register bit 5
.equ	DDB6	= 6	; Port B Data Direction Register bit 6
.equ	DDB7	= 7	; Port B Data Direction Register bit 7

; PINB - Port B Input Pins
.equ	PINB0	= 0	; Port B Input Pins bit 0
.equ	PINB1	= 1	; Port B Input Pins bit 1
.equ	PINB2	= 2	; Port B Input Pins bit 2
.equ	PINB3	= 3	; Port B Input Pins bit 3
.equ	PINB4	= 4	; Port B Input Pins bit 4
.equ	PINB5	= 5	; Port B Input Pins bit 5
.equ	PINB6	= 6	; Port B Input Pins bit 6
.equ	PINB7	= 7	; Port B Input Pins bit 7


; ***** TIMER_COUNTER_0 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ	OCIE0A	= 0	; Timer/Counter0 Output Compare Match A Interrupt Enable
.equ	TOIE0	= 1	; Timer/Counter0 Overflow Interrupt Enable
.equ	OCIE0B	= 2	; Timer/Counter0 Output Compare Match B Interrupt Enable

; TIFR - Timer/Counter Interrupt Flag register
.equ	OCF0A	= 0	; Timer/Counter0 Output Compare Flag 0A
.equ	TOV0	= 1	; Timer/Counter0 Overflow Flag
.equ	OCF0B	= 2	; Timer/Counter0 Output Compare Flag 0B

; OCR0B - Timer/Counter0 Output Compare Register
.equ	OCR0_0	= 0	; 
.equ	OCR0_1	= 1	; 
.equ	OCR0_2	= 2	; 
.equ	OCR0_3	= 3	; 
.equ	OCR0_4	= 4	; 
.equ	OCR0_5	= 5	; 
.equ	OCR0_6	= 6	; 
.equ	OCR0_7	= 7	; 

; OCR0A - Timer/Counter0 Output Compare Register
.equ	OCR0A_0	= 0	; 
.equ	OCR0A_1	= 1	; 
.equ	OCR0A_2	= 2	; 
.equ	OCR0A_3	= 3	; 
.equ	OCR0A_4	= 4	; 
.equ	OCR0A_5	= 5	; 
.equ	OCR0A_6	= 6	; 
.equ	OCR0A_7	= 7	; 

; TCCR0A - Timer/Counter  Control Register A
.equ	WGM00	= 0	; Waveform Generation Mode
.equ	WGM01	= 1	; Waveform Generation Mode
.equ	COM0B0	= 4	; Compare Match Output B Mode
.equ	COM0B1	= 5	; Compare Match Output B Mode
.equ	COM0A0	= 6	; Compare Match Output A Mode
.equ	COM0A1	= 7	; Compare Match Output A Mode

; TCNT0 - Timer/Counter0
.equ	TCNT0_0	= 0	; 
.equ	TCNT0_1	= 1	; 
.equ	TCNT0_2	= 2	; 
.equ	TCNT0_3	= 3	; 
.equ	TCNT0_4	= 4	; 
.equ	TCNT0_5	= 5	; 
.equ	TCNT0_6	= 6	; 
.equ	TCNT0_7	= 7	; 

; TCCR0B - Timer/Counter Control Register B
.equ	TCCR0	= TCCR0B	; For compatibility
.equ	CS00	= 0	; Clock Select
.equ	CS01	= 1	; Clock Select
.equ	CS02	= 2	; Clock Select
.equ	WGM02	= 3	; 
.equ	FOC0B	= 6	; Force Output Compare B
.equ	FOC0A	= 7	; Force Output Compare B


; ***** TIMER_COUNTER_1 **************
; TIMSK - Timer/Counter Interrupt Mask Register
.equ	ICIE1	= 3	; Timer/Counter1 Input Capture Interrupt Enable
.equ	TICIE	= ICIE1	; For compatibility
.equ	OCIE1B	= 5	; Timer/Counter1 Output CompareB Match Interrupt Enable
.equ	OCIE1A	= 6	; Timer/Counter1 Output CompareA Match Interrupt Enable
.equ	TOIE1	= 7	; Timer/Counter1 Overflow Interrupt Enable

; TIFR - Timer/Counter Interrupt Flag register
.equ	ICF1	= 3	; Input Capture Flag 1
.equ	OCF1B	= 5	; Output Compare Flag 1B
.equ	OCF1A	= 6	; Output Compare Flag 1A
.equ	TOV1	= 7	; Timer/Counter1 Overflow Flag

; TCCR1A - Timer/Counter1 Control Register A
.equ	WGM10	= 0	; Pulse Width Modulator Select Bit 0
.equ	PWM10	= WGM10	; For compatibility
.equ	WGM11	= 1	; Pulse Width Modulator Select Bit 1
.equ	PWM11	= WGM11	; For compatibility
.equ	COM1B0	= 4	; Comparet Ouput Mode 1B, bit 0
.equ	COM1B1	= 5	; Compare Output Mode 1B, bit 1
.equ	COM1A0	= 6	; Comparet Ouput Mode 1A, bit 0
.equ	COM1A1	= 7	; Compare Output Mode 1A, bit 1

; TCCR1B - Timer/Counter1 Control Register B
.equ	CS10	= 0	; Clock Select bit 0
.equ	CS11	= 1	; Clock Select 1 bit 1
.equ	CS12	= 2	; Clock Select1 bit 2
.equ	WGM12	= 3	; Waveform Generation Mode Bit 2
.equ	CTC1	= WGM12	; For compatibility
.equ	WGM13	= 4	; Waveform Generation Mode Bit 3
.equ	ICES1	= 6	; Input Capture 1 Edge Select
.equ	ICNC1	= 7	; Input Capture 1 Noise Canceler

; TCCR1C - Timer/Counter1 Control Register C
.equ	FOC1B	= 6	; Force Output Compare for Channel B
.equ	FOC1A	= 7	; Force Output Compare for Channel A


; ***** WATCHDOG *********************
; WDTCR - Watchdog Timer Control Register
.equ	WDTCSR	= WDTCR	; For compatibility
.equ	WDP0	= 0	; Watch Dog Timer Prescaler bit 0
.equ	WDP1	= 1	; Watch Dog Timer Prescaler bit 1
.equ	WDP2	= 2	; Watch Dog Timer Prescaler bit 2
.equ	WDE	= 3	; Watch Dog Enable
.equ	WDCE	= 4	; Watchdog Change Enable
.equ	WDTOE	= WDCE	; For compatibility
.equ	WDP3	= 5	; Watchdog Timer Prescaler Bit 3
.equ	WDIE	= 6	; Watchdog Timeout Interrupt Enable
.equ	WDIF	= 7	; Watchdog Timeout Interrupt Flag


; ***** USART ************************
; UDR - USART I/O Data Register
.equ	UDR0	= 0	; USART I/O Data Register bit 0
.equ	UDR1	= 1	; USART I/O Data Register bit 1
.equ	UDR2	= 2	; USART I/O Data Register bit 2
.equ	UDR3	= 3	; USART I/O Data Register bit 3
.equ	UDR4	= 4	; USART I/O Data Register bit 4
.equ	UDR5	= 5	; USART I/O Data Register bit 5
.equ	UDR6	= 6	; USART I/O Data Register bit 6
.equ	UDR7	= 7	; USART I/O Data Register bit 7

; UCSRA - USART Control and Status Register A
.equ	USR	= UCSRA	; For compatibility
.equ	MPCM	= 0	; Multi-processor Communication Mode
.equ	U2X	= 1	; Double the USART Transmission Speed
.equ	UPE	= 2	; USART Parity Error
.equ	PE	= UPE	; For compatibility
.equ	DOR	= 3	; Data overRun
.equ	FE	= 4	; Framing Error
.equ	UDRE	= 5	; USART Data Register Empty
.equ	TXC	= 6	; USART Transmitt Complete
.equ	RXC	= 7	; USART Receive Complete

; UCSRB - USART Control and Status Register B
.equ	UCR	= UCSRB	; For compatibility
.equ	TXB8	= 0	; Transmit Data Bit 8
.equ	RXB8	= 1	; Receive Data Bit 8
.equ	UCSZ2	= 2	; Character Size
.equ	CHR9	= UCSZ2	; For compatibility
.equ	TXEN	= 3	; Transmitter Enable
.equ	RXEN	= 4	; Receiver Enable
.equ	UDRIE	= 5	; USART Data register Empty Interrupt Enable
.equ	TXCIE	= 6	; TX Complete Interrupt Enable
.equ	RXCIE	= 7	; RX Complete Interrupt Enable

; UCSRC - USART Control and Status Register C
.equ	UCPOL	= 0	; Clock Polarity
.equ	UCSZ0	= 1	; Character Size Bit 0
.equ	UCSZ1	= 2	; Character Size Bit 1
.equ	USBS	= 3	; Stop Bit Select
.equ	UPM0	= 4	; Parity Mode Bit 0
.equ	UPM1	= 5	; Parity Mode Bit 1
.equ	UMSEL	= 6	; USART Mode Select

.equ	UBRR	= UBRRL	; For compatibility

; ***** ANALOG_COMPARATOR ************
; ACSR - Analog Comparator Control And Status Register
.equ	ACIS0	= 0	; Analog Comparator Interrupt Mode Select bit 0
.equ	ACIS1	= 1	; Analog Comparator Interrupt Mode Select bit 1
.equ	ACIC	= 2	; 
.equ	ACIE	= 3	; Analog Comparator Interrupt Enable
.equ	ACI	= 4	; Analog Comparator Interrupt Flag
.equ	ACO	= 5	; Analog Compare Output
.equ	ACBG	= 6	; Analog Comparator Bandgap Select
.equ	ACD	= 7	; Analog Comparator Disable

; DIDR - Digital Input Disable Register 1
.equ	AIN0D	= 0	; AIN0 Digital Input Disable
.equ	AIN1D	= 1	; AIN1 Digital Input Disable


; ***** PORTD ************************
; PORTD - Data Register, Port D
.equ	PORTD0	= 0	; 
.equ	PD0	= 0	; For compatibility
.equ	PORTD1	= 1	; 
.equ	PD1	= 1	; For compatibility
.equ	PORTD2	= 2	; 
.equ	PD2	= 2	; For compatibility
.equ	PORTD3	= 3	; 
.equ	PD3	= 3	; For compatibility
.equ	PORTD4	= 4	; 
.equ	PD4	= 4	; For compatibility
.equ	PORTD5	= 5	; 
.equ	PD5	= 5	; For compatibility
.equ	PORTD6	= 6	; 
.equ	PD6	= 6	; For compatibility

; DDRD - Data Direction Register, Port D
.equ	DDD0	= 0	; 
.equ	DDD1	= 1	; 
.equ	DDD2	= 2	; 
.equ	DDD3	= 3	; 
.equ	DDD4	= 4	; 
.equ	DDD5	= 5	; 
.equ	DDD6	= 6	; 

; PIND - Input Pins, Port D
.equ	PIND0	= 0	; 
.equ	PIND1	= 1	; 
.equ	PIND2	= 2	; 
.equ	PIND3	= 3	; 
.equ	PIND4	= 4	; 
.equ	PIND5	= 5	; 
.equ	PIND6	= 6	; 


; ***** EEPROM ***********************
; EEAR - EEPROM Read/Write Access
.equ	EEARL	= EEAR	; For compatibility
.equ	EEAR0	= 0	; EEPROM Read/Write Access bit 0
.equ	EEAR1	= 1	; EEPROM Read/Write Access bit 1
.equ	EEAR2	= 2	; EEPROM Read/Write Access bit 2
.equ	EEAR3	= 3	; EEPROM Read/Write Access bit 3
.equ	EEAR4	= 4	; EEPROM Read/Write Access bit 4
.equ	EEAR5	= 5	; EEPROM Read/Write Access bit 5
.equ	EEAR6	= 6	; EEPROM Read/Write Access bit 6

; EEDR - EEPROM Data Register
.equ	EEDR0	= 0	; EEPROM Data Register bit 0
.equ	EEDR1	= 1	; EEPROM Data Register bit 1
.equ	EEDR2	= 2	; EEPROM Data Register bit 2
.equ	EEDR3	= 3	; EEPROM Data Register bit 3
.equ	EEDR4	= 4	; EEPROM Data Register bit 4
.equ	EEDR5	= 5	; EEPROM Data Register bit 5
.equ	EEDR6	= 6	; EEPROM Data Register bit 6
.equ	EEDR7	= 7	; EEPROM Data Register bit 7

; EECR - EEPROM Control Register
.equ	EERE	= 0	; EEPROM Read Enable
.equ	EEPE	= 1	; EEPROM Write Enable
.equ	EEWE	= EEPE	; For compatibility
.equ	EEMPE	= 2	; EEPROM Master Write Enable
.equ	EEMWE	= EEMPE	; For compatibility
.equ	EERIE	= 3	; EEProm Ready Interrupt Enable
.equ	EEPM0	= 4	; 
.equ	EEPM1	= 5	; 


; ***** PORTA ************************
; PORTA - Port A Data Register
.equ	PORTA0	= 0	; Port A Data Register bit 0
.equ	PA0	= 0	; For compatibility
.equ	PORTA1	= 1	; Port A Data Register bit 1
.equ	PA1	= 1	; For compatibility
.equ	PORTA2	= 2	; Port A Data Register bit 2
.equ	PA2	= 2	; For compatibility

; DDRA - Port A Data Direction Register
.equ	DDA0	= 0	; Data Direction Register, Port A, bit 0
.equ	DDA1	= 1	; Data Direction Register, Port A, bit 1
.equ	DDA2	= 2	; Data Direction Register, Port A, bit 2

; PINA - Port A Input Pins
.equ	PINA0	= 0	; Input Pins, Port A bit 0
.equ	PINA1	= 1	; Input Pins, Port A bit 1
.equ	PINA2	= 2	; Input Pins, Port A bit 2


; ***** USI **************************
; USIDR - USI Data Register
.equ	USIDR0	= 0	; USI Data Register bit 0
.equ	USIDR1	= 1	; USI Data Register bit 1
.equ	USIDR2	= 2	; USI Data Register bit 2
.equ	USIDR3	= 3	; USI Data Register bit 3
.equ	USIDR4	= 4	; USI Data Register bit 4
.equ	USIDR5	= 5	; USI Data Register bit 5
.equ	USIDR6	= 6	; USI Data Register bit 6
.equ	USIDR7	= 7	; USI Data Register bit 7

; USISR - USI Status Register
.equ	USICNT0	= 0	; USI Counter Value Bit 0
.equ	USICNT1	= 1	; USI Counter Value Bit 1
.equ	USICNT2	= 2	; USI Counter Value Bit 2
.equ	USICNT3	= 3	; USI Counter Value Bit 3
.equ	USIDC	= 4	; Data Output Collision
.equ	USIPF	= 5	; Stop Condition Flag
.equ	USIOIF	= 6	; Counter Overflow Interrupt Flag
.equ	USISIF	= 7	; Start Condition Interrupt Flag

; USICR - USI Control Register
.equ	USITC	= 0	; Toggle Clock Port Pin
.equ	USICLK	= 1	; Clock Strobe
.equ	USICS0	= 2	; USI Clock Source Select Bit 0
.equ	USICS1	= 3	; USI Clock Source Select Bit 1
.equ	USIWM0	= 4	; USI Wire Mode Bit 0
.equ	USIWM1	= 5	; USI Wire Mode Bit 1
.equ	USIOIE	= 6	; Counter Overflow Interrupt Enable
.equ	USISIE	= 7	; Start Condition Interrupt Enable


; ***** EXTERNAL_INTERRUPT ***********
; GIMSK - General Interrupt Mask Register
.equ	PCIE	= 5	; 
.equ	INT0	= 6	; External Interrupt Request 0 Enable
.equ	INT1	= 7	; External Interrupt Request 1 Enable

; EIFR - Extended Interrupt Flag Register
.equ	GIFR	= EIFR	; For compatibility
.equ	PCIF	= 5	; 
.equ	INTF0	= 6	; External Interrupt Flag 0
.equ	INTF1	= 7	; External Interrupt Flag 1

; PCMSK2 - Pin Change Interrupt Mask Register 2
.equ	PCINT11	= 0	; Pin Change Interrupt Mask 11
.equ	PCINT12	= 1	; Pin Change Interrupt Mask 12
.equ	PCINT13	= 2	; Pin Change Interrupt Mask 13
.equ	PCINT14	= 3	; Pin Change Interrupt Mask 14
.equ	PCINT15	= 4	; Pin Change Interrupt Mask 15
.equ	PCINT16	= 5	; Pin Change Interrupt Mask 16
.equ	PCINT17	= 6	; Pin Change Interrupt Mask 17

; PCMSK1 - Pin Change Interrupt Mask Register 1
.equ	PCINT8	= 0	; Pin Change Interrupt Mask 8
.equ	PCINT9	= 1	; Pin Change Interrupt Mask 9
.equ	PCINT10	= 2	; Pin Change Interrupt Mask 10


; ***** CPU **************************
; SREG - Status Register
.equ	SREG_C	= 0	; Carry Flag
.equ	SREG_Z	= 1	; Zero Flag
.equ	SREG_N	= 2	; Negative Flag
.equ	SREG_V	= 3	; Two's Complement Overflow Flag
.equ	SREG_S	= 4	; Sign Bit
.equ	SREG_H	= 5	; Half Carry Flag
.equ	SREG_T	= 6	; Bit Copy Storage
.equ	SREG_I	= 7	; Global Interrupt Enable

; SPMCSR - Store Program Memory Control and Status register
.equ	SPMEN	= 0	; Store Program Memory Enable
.equ	PGERS	= 1	; Page Erase
.equ	PGWRT	= 2	; Page Write
.equ	RFLB	= 3	; Read Fuse and Lock Bits
.equ	CTPB	= 4	; Clear Temporary Page Buffer

; MCUCR - MCU Control Register
.equ	ISC00	= 0	; Interrupt Sense Control 0 bit 0
.equ	ISC01	= 1	; Interrupt Sense Control 0 bit 1
.equ	ISC10	= 2	; Interrupt Sense Control 1 bit 0
.equ	ISC11	= 3	; Interrupt Sense Control 1 bit 1
.equ	SM0	= 4	; Sleep Mode Select Bit 0
.equ	SM	= SM0	; For compatibility
.equ	SE	= 5	; Sleep Enable
.equ	SM1	= 6	; Sleep Mode Select Bit 1
.equ	PUD	= 7	; Pull-up Disable

; CLKPR - Clock Prescale Register
.equ	CLKPS0	= 0	; Clock Prescaler Select Bit 0
.equ	CLKPS1	= 1	; Clock Prescaler Select Bit 1
.equ	CLKPS2	= 2	; Clock Prescaler Select Bit 2
.equ	CLKPS3	= 3	; Clock Prescaler Select Bit 3
.equ	CLKPCE	= 7	; Clock Prescaler Change Enable

; MCUSR - MCU Status register
.equ	PORF	= 0	; Power-On Reset Flag
.equ	EXTRF	= 1	; External Reset Flag
.equ	BORF	= 2	; Brown-out Reset Flag
.equ	WDRF	= 3	; Watchdog Reset Flag

; OSCCAL - Oscillator Calibration Register
.equ	CAL0	= 0	; Oscillatro Calibration Value Bit 0
.equ	CAL1	= 1	; Oscillatro Calibration Value Bit 1
.equ	CAL2	= 2	; Oscillatro Calibration Value Bit 2
.equ	CAL3	= 3	; Oscillatro Calibration Value Bit 3
.equ	CAL4	= 4	; Oscillatro Calibration Value Bit 4
.equ	CAL5	= 5	; Oscillatro Calibration Value Bit 5
.equ	CAL6	= 6	; Oscillatro Calibration Value Bit 6

; GTCCR - General Timer Counter Control Register
.equ	SFIOR	= GTCCR	; For compatibility
.equ	PSR10	= 0	; 

; PCMSK - Pin-Change Mask register
.equ	PCINT0	= 0	; Pin-Change Interrupt 0
.equ	PCINT1	= 1	; Pin-Change Interrupt 1
.equ	PCINT2	= 2	; Pin-Change Interrupt 2
.equ	PCINT3	= 3	; Pin-Change Interrupt 3
.equ	PCINT4	= 4	; Pin-Change Interrupt 4
.equ	PCINT5	= 5	; Pin-Change Interrupt 5
.equ	PCINT6	= 6	; Pin-Change Interrupt 6
.equ	PCINT7	= 7	; Pin-Change Interrupt 7

; GPIOR2 - General Purpose I/O Register 2
.equ	GPIOR20	= 0	; General Purpose I/O Register 2 bit 0
.equ	GPIOR21	= 1	; General Purpose I/O Register 2 bit 1
.equ	GPIOR22	= 2	; General Purpose I/O Register 2 bit 2
.equ	GPIOR23	= 3	; General Purpose I/O Register 2 bit 3
.equ	GPIOR24	= 4	; General Purpose I/O Register 2 bit 4
.equ	GPIOR25	= 5	; General Purpose I/O Register 2 bit 5
.equ	GPIOR26	= 6	; General Purpose I/O Register 2 bit 6
.equ	GPIOR27	= 7	; General Purpose I/O Register 2 bit 7

; GPIOR1 - General Purpose I/O Register 1
.equ	GPIOR10	= 0	; General Purpose I/O Register 1 bit 0
.equ	GPIOR11	= 1	; General Purpose I/O Register 1 bit 1
.equ	GPIOR12	= 2	; General Purpose I/O Register 1 bit 2
.equ	GPIOR13	= 3	; General Purpose I/O Register 1 bit 3
.equ	GPIOR14	= 4	; General Purpose I/O Register 1 bit 4
.equ	GPIOR15	= 5	; General Purpose I/O Register 1 bit 5
.equ	GPIOR16	= 6	; General Purpose I/O Register 1 bit 6
.equ	GPIOR17	= 7	; General Purpose I/O Register 1 bit 7

; GPIOR0 - General Purpose I/O Register 0
.equ	GPIOR00	= 0	; General Purpose I/O Register 0 bit 0
.equ	GPIOR01	= 1	; General Purpose I/O Register 0 bit 1
.equ	GPIOR02	= 2	; General Purpose I/O Register 0 bit 2
.equ	GPIOR03	= 3	; General Purpose I/O Register 0 bit 3
.equ	GPIOR04	= 4	; General Purpose I/O Register 0 bit 4
.equ	GPIOR05	= 5	; General Purpose I/O Register 0 bit 5
.equ	GPIOR06	= 6	; General Purpose I/O Register 0 bit 6
.equ	GPIOR07	= 7	; General Purpose I/O Register 0 bit 7

; PRR - Power reduction register
.equ	PRUSART	= 0	; 
.equ	PRUSI	= 1	; 
.equ	PRTIM0	= 2	; 
.equ	PRTIM1	= 3	; 

; BODCR - BOD control register
.equ	BPDSE	= 0	; 
.equ	BPDS	= 1	; 



; ***** LOCKSBITS ********************************************************
.equ	LB1	= 0	; Lockbit
.equ	LB2	= 1	; Lockbit


; ***** FUSES ************************************************************
; LOW fuse bits
.equ	CKSEL0	= 0	; Select Clock Source
.equ	CKSEL1	= 1	; Select Clock Source
.equ	CKSEL2	= 2	; Select Clock Source
.equ	CKSEL3	= 3	; Select Clock Source
.equ	SUT0	= 4	; Select start-up time
.equ	SUT1	= 5	; Select start-up time
.equ	CKOUT	= 6	; Clock output
.equ	CKDIV8	= 7	; Divide clock by 8

; HIGH fuse bits
.equ	BODLEVEL0	= 0	; Brown-out Detector trigger level
.equ	BODLEVEL1	= 1	; Brown-out Detector trigger level
.equ	BODLEVEL2	= 2	; Brown-out Detector trigger level
.equ	EESAVE	= 3	; EEPROM memory is preserved through chip erase
.equ	WDTON	= 4	; Watchdog Timer Always On
.equ	SPIEN	= 5	; Enable Serial programming and Data Downloading
.equ	DWEN	= 6	; debugWIRE Enable
.equ	RSTDISBL	= 7	; External reset disable

; EXTENDED fuse bits
.equ	SELFPRGEN	= 0	; Self Programming Enable



; ***** CPU REGISTER DEFINITIONS *****************************************
.def	XH	= r27
.def	XL	= r26
.def	YH	= r29
.def	YL	= r28
.def	ZH	= r31
.def	ZL	= r30



; ***** DATA MEMORY DECLARATIONS *****************************************
.equ	FLASHEND	= 0x07ff	; Note: Word address
.equ	IOEND	= 0x003f
.equ	SRAM_START	= 0x0060
.equ	SRAM_SIZE	= 256
.equ	RAMEND	= 0x015f
.equ	XRAMEND	= 0x0000
.equ	E2END	= 0x00ff
.equ	EEPROMEND	= 0x00ff
.equ	EEADRBITS	= 8
#pragma AVRPART MEMORY PROG_FLASH 4096
#pragma AVRPART MEMORY EEPROM 256
#pragma AVRPART MEMORY INT_SRAM SIZE 256
#pragma AVRPART MEMORY INT_SRAM START_ADDR 0x60



; ***** BOOTLOADER DECLARATIONS ******************************************
.equ	NRWW_START_ADDR	= 0x0
.equ	NRWW_STOP_ADDR	= 0x3ff
.equ	RWW_START_ADDR	= 0x0
.equ	RWW_STOP_ADDR	= 0x0
.equ	PAGESIZE	= 32



; ***** INTERRUPT VECTORS ************************************************
.equ	INT0addr	= 0x0001	; External Interrupt Request 0
.equ	INT1addr	= 0x0002	; External Interrupt Request 1
.equ	ICP1addr	= 0x0003	; Timer/Counter1 Capture Event
.equ	OC1Aaddr	= 0x0004	; Timer/Counter1 Compare Match A
.equ	OC1addr	= 0x0004	; For compatibility
.equ	OVF1addr	= 0x0005	; Timer/Counter1 Overflow
.equ	OVF0addr	= 0x0006	; Timer/Counter0 Overflow
.equ	URXCaddr	= 0x0007	; USART, Rx Complete
.equ	URXC0addr	= 0x0007	; For compatibility
.equ	UDREaddr	= 0x0008	; USART Data Register Empty
.equ	UDRE0addr	= 0x0008	; For compatibility
.equ	UTXCaddr	= 0x0009	; USART, Tx Complete
.equ	UTXC0addr	= 0x0009	; For compatibility
.equ	ACIaddr	= 0x000a	; Analog Comparator
.equ	PCIBaddr	= 0x000b	; Pin Change Interrupt Request B
.equ	PCIaddr	= 0x000b	; For compatibility
.equ	OC1Baddr	= 0x000c	; 
.equ	OC0Aaddr	= 0x000d	; 
.equ	OC0Baddr	= 0x000e	; 
.equ	USI_STARTaddr	= 0x000f	; USI Start Condition
.equ	USI_OVFaddr	= 0x0010	; USI Overflow
.equ	ERDYaddr	= 0x0011	; 
.equ	WDTaddr	= 0x0012	; Watchdog Timer Overflow
.equ	PCIAaddr	= 0x0013	; Pin Change Interrupt Request A
.equ	PCIDaddr	= 0x0014	; Pin Change Interrupt Request D

.equ	INT_VECTORS_SIZE	= 21	; size in words

#endif  /* _TN4313DEF_INC_ */

; ***** END OF FILE ******************************************************