#include <mega1281.h>
#include <delay.h>
#include <spi.h>
#include <ff.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>


#include "KS0108AVR.c"
#include "KS0108.c"
#include "graphic.c"
#include "pflac.c"



#define _USE_LFN 1

long i,j,a;
char flag;

FRESULT result;
FATFS drive;
FILINFO fno;
DIR dir;

static FATFS FATFS_Obj; 
FIL fil_obj;  
char mp3_buffer[3200];
 char *audiodata_pntr;



char lcd_buffer[10];


char * flash error_msg[]=
{
"", /* not used */
"FR_DISK_ERR",
"FR_INT_ERR",
"FR_INT_ERR",
"FR_NOT_READY",
"FR_NO_FILE",
"FR_NO_PATH",
"FR_INVALID_NAME",
"FR_DENIED",
"FR_EXIST",
"FR_INVALID_OBJECT",
"FR_WRITE_PROTECTED",
"FR_INVALID_DRIVE",
"FR_NOT_ENABLED",
"FR_NO_FILESYSTEM",
"FR_MKFS_ABORTED",
"FR_TIMEOUT"
};

unsigned int ByteRead=0;


#include "vs1053.c"



interrupt [TIM0_OVF] void timer0_ovf_isr (void)
{
TCNT0=0x64;
disk_timerproc();  

}



interrupt [TIM3_COMPA] void timer3_compa_isr(void)
{
TCNT3H=0x00;
TCNT3L=0x00;

GLCD_GoTo(0,1);
j=j*32;
j=((j/1024)*8);
sprintf(lcd_buffer,"%d",j);
GLCD_WriteString(lcd_buffer); //show speed data sending to VS1053

j=0;
a=0;
}







void main(void)
{
// Declare your local variables here


char var[150]="";

int nFiles=0;
int i,j;

// Crystal Oscillator division factor: 1
#pragma optsize-
CLKPR=0x80;
CLKPR=0x00;
#ifdef _OPTIMIZE_SIZE_
#pragma optsize+
#endif

// Input/Output Ports initialization
// Port A initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTA=0x00;
DDRA=0xFF;

// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=Out Func1=Out Func0=Out 
// State7=T State6=T State5=T State4=T State3=T State2=0 State1=0 State0=0 
PORTB=0x00;
DDRB=0xC7;

// Port C initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=P State4=T State3=T State2=T State1=T State0=T 
PORTC=0x00;
DDRC=0xFF;

// Port D initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTD=0x00;
DDRD=0x00;

// Port E initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTE=0x00;
DDRE=0x00;

// Port F initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=T 
PORTF=0x00;
DDRF=0x17;

// Port G initialization
// Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In 
// State5=T State4=T State3=T State2=T State1=T State0=T 
PORTG=0x00;
DDRG=0x00;


TCCR0A=0x00;
TCCR0B=0x00;
TCNT0=0x64;         


// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// OC1C output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
// Compare C Match Interrupt: Off
TCCR1A=0x31;
TCCR1B=0x0b;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
OCR1BH=0;
OCR1BL=60;
OCR1CH=0x00;
OCR1CL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=FFh
// OC2A output: Disconnected
// OC2B output: Disconnected
ASSR=0x00;
TCCR2A=0x00;
TCCR2B=0x00;
TCNT2=0x00;
OCR2A=0x00;
OCR2B=0x00;

// Timer/Counter 3 initialization
// Clock source: System Clock
// Clock value: Timer3 Stopped
// Mode: Normal top=FFFFh
// OC3A output: Discon.
// OC3B output: Discon.
// OC3C output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer3 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
// Compare C Match Interrupt: Off
TCCR3A=0x00;
TCCR3B=0x04;
TCNT3H=0x00;
TCNT3L=0x00;
ICR3H=0x00;
ICR3L=0x00;
OCR3AH=0x00;
OCR3AL=0x00;
OCR3BH=0x00;
OCR3BL=0x00;
OCR3CH=0x00;
OCR3CL=0x00;

// Timer/Counter 4 initialization
// Clock source: System Clock
// Clock value: Timer4 Stopped
// Mode: Normal top=FFFFh
// OC4A output: Discon.
// OC4B output: Discon.
// OC4C output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer4 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
// Compare C Match Interrupt: Off
TCCR4A=0x00;
TCCR4B=0x00;
TCNT4H=0x00;
TCNT4L=0x00;
ICR4H=0x00;
ICR4L=0x00;
OCR4AH=0x00;
OCR4AL=0x00;
OCR4BH=0x00;
OCR4BL=0x00;
OCR4CH=0x00;
OCR4CL=0x00;

// Timer/Counter 5 initialization
// Clock source: System Clock
// Clock value: Timer5 Stopped
// Mode: Normal top=FFFFh
// OC5A output: Discon.
// OC5B output: Discon.
// OC5C output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer5 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
// Compare C Match Interrupt: Off
TCCR5A=0x00;
TCCR5B=0x00;
TCNT5H=0x00;
TCNT5L=0x00;
ICR5H=0x00;
ICR5L=0x00;
OCR5AH=0x00;
OCR5AL=0x00;
OCR5BH=0x00;
OCR5BL=0x00;
OCR5CH=0x00;
OCR5CL=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
// INT3: Off
// INT4: Off
// INT5: Off
// INT6: Off
// INT7: Off
EICRA=0x00;
EICRB=0x00;
EIMSK=0x00;
// PCINT0 interrupt: Off
// PCINT1 interrupt: Off
// PCINT2 interrupt: Off
// PCINT3 interrupt: Off
// PCINT4 interrupt: Off
// PCINT5 interrupt: Off
// PCINT6 interrupt: Off
// PCINT7 interrupt: Off
// PCINT8 interrupt: Off
// PCINT9 interrupt: Off
// PCINT10 interrupt: Off
// PCINT11 interrupt: Off
// PCINT12 interrupt: Off
// PCINT13 interrupt: Off
// PCINT14 interrupt: Off
// PCINT15 interrupt: Off
// PCINT16 interrupt: Off
// PCINT17 interrupt: Off
// PCINT18 interrupt: Off
// PCINT19 interrupt: Off
// PCINT20 interrupt: Off
// PCINT21 interrupt: Off
// PCINT22 interrupt: Off
// PCINT23 interrupt: Off
PCMSK0=0x00;
PCMSK1=0x00;
PCMSK2=0x00;
PCICR=0x00;

// Timer/Counter 0 Interrupt(s) initialization
TIMSK0=0x01;
// Timer/Counter 1 Interrupt(s) initialization
TIMSK1=0x00;
// Timer/Counter 2 Interrupt(s) initialization
TIMSK2=0x00;
// Timer/Counter 3 Interrupt(s) initialization
TIMSK3=0x02;
// Timer/Counter 4 Interrupt(s) initialization
TIMSK4=0x00;
// Timer/Counter 5 Interrupt(s) initialization
TIMSK5=0x00;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
ADCSRB=0x00;


// SPI initialization
// SPI Type: Master
// SPI Clock Rate: 4000,000 kHz
// SPI Clock Phase: Cycle Half
// SPI Clock Polarity: Low
// SPI Data Order: MSB First
SPCR=0x54;
SPSR=0x01;


#asm("sei")

 GLCD_Initalize(); 
 GLCD_ClearScreen();
 GLCD_GoTo(0,0);  
  
 
TCCR0B=0x05;
 
disk_initialize(0);
 if (disk_status==0)
   GLCD_WriteString("Drive init OK");
 else
   GLCD_WriteString("Drive error");   
   


   
f_mount(0,&drive);



f_open(&fil_obj, "TRACK.MP3", FA_READ);

vs_init();


f_read(&fil_obj,mp3_buffer,512,&ByteRead); 

audiodata_pntr = mp3_buffer;


while (1)
      {
      // Place your code here  
       vs_play(); 
      };  
}