*** Warning - bad CRC or NAND, using default environment ##### EmbedSky BIOS for SKY2440/TQ2440 ##### Press Space key to Download Mode ! Booting Linux ... Copy linux kernel from 0x00200000 to 0x30008000, size = 0x00200000 ... Copy Kernel to SDRAM done,NOW, Booting Linux...... Uncompressing Linux............................................................................................................ done, booting the kernel. Linux version 2.6.30.4 (root@localhost.localdomain) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-176) ) #17 Sun Oct 9 14:24:29 CST 2011 CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 CPU: VIVT data cache, VIVT instruction cache Machine: TQ2440 ATAG_INITRD is deprecated; please update your bootloader. Memory policy: ECC disabled, Data cache writeback CPU S3C2440A (id 0x32440001) S3C24XX Clocks, (c) 2004 Simtec Electronics S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: noinitrd root=/dev/mtdblock2 init=/linuxrc console=ttySAC0 NR_IRQS:85 irq: clearing pending ext status 00000200 irq: clearing subpending status 00000002 PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x30 console [ttySAC0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61316KB available (3116K code, 333K data, 100K init, 0K highmem) SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 296 bytes NET: Registered protocol family 16 S3C2440: Initialising architecture S3C2440: IRQ Support S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics DMA channel 0 at c4808000, irq 33 DMA channel 1 at c4808040, irq 34 DMA channel 2 at c4808080, irq 35 DMA channel 3 at c48080c0, irq 36 S3C244X: Clock Support, DVS off bio: create slab at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 yaffs Sep 30 2011 10:36:32 Installing. msgmni has been set to 119 alg: No test for stdrng (krng) io scheduler noop registered (default) s3c2440-uart.0: tq2440_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 s3c2440-uart.1: tq2440_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 s3c2440-uart.2: tq2440_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 loop: module loaded Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods S3C24XX NAND Driver, (c) 2004 Simtec Electronics s3c2440-nand s3c2440-nand: Tacls=2, 20ns Twrph0=3 30ns, Twrph1=2 20ns NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit) Scanning device for bad blocks Creating 3 MTD partitions on "NAND 64MiB 3,3V 8-bit": 0x000000000000-0x000000040000 : "EmbedSky_Board_uboot" 0x000000200000-0x000000400000 : "EmbedSky_Board_kernel" 0x000000400000-0x000003ff8000 : "EmbedSky_Board_yaffs2" ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver s3c2410-ohci s3c2410-ohci: S3C24XX OHCI s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice S3C24XX RTC, (c) 2004,2006 Simtec Electronics s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0 Linux video capture interface: v2.00 S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics s3c2410-wdt s3c2410-wdt: starting watchdog timer s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq enabled mapped channel 0 to 0 s3c2440-sdi s3c2440-sdi: powered down. s3c2440-sdi s3c2440-sdi: initialisation done. Advanced Linux Sound Architecture Driver Version 1.0.18a. No device for DAI UDA134X No device for DAI s3c24xx-i2s S3C24XX_UDA134X SoC Audio driver UDA134X SoC Audio Codec asoc: UDA134X <-> s3c24xx-i2s mapping ok s3c2440-sdi s3c2440-sdi: powered down. ALSA device list: #0: S3C24XX_UDA134X (UDA134X) TCP cubic registered RPC: Registered udp transport module. RPC: Registered tcp transport module. lib80211: common routines for IEEE802.11 drivers s3c2410-rtc s3c2410-rtc: setting system clock to 2014-08-14 22:14:51 UTC (1408054491) yaffs: dev is 32505858 name is "mtdblock2" yaffs: passed flags "" yaffs: Attempting MTD mount on 31.2, "mtdblock2" usb 1-1: new full speed USB device using s3c2410-ohci and address 2 usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 1 port detected usb 1-1.1: new full speed USB device using s3c2410-ohci and address 3 usb 1-1.1: configuration #1 chosen from 1 choice yaffs_read_super: isCheckpointed 0 VFS: Mounted root (yaffs filesystem) on device 31:2. Freeing init memory: 100K hwclock: can't open '/dev/misc/rtc': No such file or directory mknod: /dev/pts/0: No such file or directory ln: /dev/video0: File exists ln: /dev/fb0: File exists ln: /dev/tty1: File exists ln: /dev/dsp: File exists ln: /dev/mixer: File exists ln: /dev/sda1: File exists rm: can't remove '/usr/udisk-flag': No such file or directory dso-iobank initialized CPU 400MHZ BUS 100MHZ New Log Write OK Length:47 insmod: can't insert '/dso/driver/dso-lcd.ko': No such file or directory /etc/init.d/rcS: line 37: /dso/app/setio: not found insmod: can't insert '/dso/driver/dso-usbstorage.ko': No such file or directory usbd: version magic '2.6.13 preempt ARMv4 gcc-3.4' should be '2.6.30.4 mod_unload ARMv4 ' insmod: can't insert '/dso/driver/dso-usbd.ko': invalid module format usb_char: version magic '2.6.13 preempt ARMv4 gcc-3.4' should be '2.6.30.4 mod_unload ARMv4 ' insmod: can't insert '/dso/driver/dso-usbchar.ko': invalid module format insmod: can't insert '/dso/driver/dso-usblp.ko': No such file or directory insmod: can't insert '/dso/driver/dso-fpga.ko': No such file or directory insmod: can't insert '/dso/driver/dso-i2c.ko': No such file or directory Unable to handle kernel paging request at virtual address 205a484d pgd = c39c0000 [205a484d] *pgd=00000000 Internal error: Oops: 3 [#1] Modules linked in: s3c2440io_bank CPU: 0 Not tainted (2.6.30.4 #17) PC is at __kmalloc+0x54/0xd8 LR is at __kmalloc+0x24/0xd8 pc : [] lr : [] psr: 20000093 sp : c39cfe38 ip : c032e2e4 fp : c39cfe64 r10: 000002cf r9 : 00000004 r8 : 00000020 r7 : c007a8b0 r6 : 000080d0 r5 : a0000013 r4 : 205a484d r3 : 00000000 r2 : 000000b9 r1 : 0000002d r0 : c032e2e4 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: c000717f Table: 339c0000 DAC: 00000015 Process insmod (pid: 387, stack limit = 0xc39ce268) Stack: (0xc39cfe38 to 0xc39d0000) fe20: 00000002 bf000000 fe40: 000000d0 00000000 c39718c0 000000d0 ffffffff c0026b9c c39cfe9c c39cfe68 fe60: c007a8b0 c007f558 c4824e6c 000016bc c4824000 c39ce000 00000000 c4824e6c fe80: 000016bc c4824000 c39ce000 c4825490 c39cfeb4 c39cfea0 c007abe8 c007a7bc fea0: c0026b9c 00000000 c39cfec4 c39cfeb8 c0026b9c c007abdc c39cff7c c39cfec8 fec0: c00572e4 c0026b54 00000000 00009000 00000000 c0268cf0 c0268cf0 c39cfedc fee0: 000010e8 000010e8 c4825328 c4825440 c48250d0 c4824ff8 c39718a0 c48260b0 ff00: 00000016 0000000a 00000000 00000018 00000006 00000002 00000002 c4825468 ff20: c39cff54 00000018 c0083cf4 c00983f0 c38efa00 00000000 c38eeb40 00000006 ff40: c0022008 c39ce000 c39cff64 c39cff58 c0083d84 000024a2 001e4fa8 001e4fb8 ff60: 00000000 c0022008 c39ce000 00000000 c39cffa4 c39cff80 c00583dc c0056cb4 ff80: ffffffff 001e44c0 000024a2 bea00f5e 000002f2 00000080 00000000 c39cffa8 ffa0: c0021e60 c005838c 000024a2 bea00f5e 001e4fb8 000024a2 001e4fa8 bea00f5e ffc0: 000024a2 bea00f5e 000002f2 00000080 00000000 00000002 00000000 bea00e74 ffe0: bea00c98 bea00c88 0002bd2c 00009380 20000010 001e4fb8 30403031 30403431 Backtrace: [] (__kmalloc+0x0/0xd8) from [] (__vmalloc_area_node+0x104/0x138) r8:c0026b9c r7:ffffffff r6:000000d0 r5:c39718c0 r4:00000000 [] (__vmalloc_area_node+0x0/0x138) from [] (__vmalloc_area+0x1c/0x24) [] (__vmalloc_area+0x0/0x24) from [] (module_alloc+0x58/0x60) [] (module_alloc+0x0/0x60) from [] (load_module+0x640/0x1338) [] (load_module+0x0/0x1338) from [] (sys_init_module+0x60/0x1a4) [] (sys_init_module+0x0/0x1a4) from [] (ret_fast_syscall+0x0/0x2c) r7:00000080 r6:000002f2 r5:bea00f5e r4:000024a2 Code: e59c8090 e3540000 0a000010 e59c308c (e7942103) ---[ end trace 487270d63be02edd ]--- Segmentation fault Unable to handle kernel paging request at virtual address 205a484d pgd = c39c8000 [205a484d] *pgd=00000000 Internal error: Oops: 3 [#2] Modules linked in: s3c2440io_bank CPU: 0 Tainted: G D (2.6.30.4 #17) PC is at __kmalloc+0x54/0xd8 LR is at __kmalloc+0x24/0xd8 pc : [] lr : [] psr: 20000093 sp : c39d5d48 ip : c032e2e4 fp : c39d5d74 r10: c340c280 r9 : c39d5de8 r8 : 00000020 r7 : c00fb664 r6 : 00000050 r5 : a0000013 r4 : 205a484d r3 : 00000000 r2 : 000000b9 r1 : 0000002d r0 : c032e2e4 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: c000717f Table: 339c8000 DAC: 00000015 Process rcS (pid: 388, stack limit = 0xc39d4268) Stack: (0xc39d5d48 to 0xc39d6000) 5d40: c39d5d84 c39d5d58 c0093880 c340c280 c38ec5c0 00000000 5d60: c39d5e98 00000000 c39d5d8c c39d5d78 c00fb664 c007f558 c340c280 c380c000 5d80: c39d5d9c c39d5d90 c00fb9a8 c00fb638 c39d5dbc c39d5da0 c00f8a60 c00fb988 5da0: c340bdd0 c39ae006 00000000 c39d5e98 c39d5e1c c39d5dc0 c008c79c c00f8a3c 5dc0: c39d5ddc c39d5de0 c39d4000 00000101 c39d5dfc c4bf50b9 00000006 c39ae006 5de0: ffffffff f4000000 c38ef180 c340c280 c39d5e6c c39d5e98 c39d5e98 c39d5e20 5e00: c39ae000 00000021 00020020 c39d5e98 c39d5e44 c39d5e20 c008ce78 c008bed0 5e20: c38ef180 c3401a80 c39d5e98 00000001 c39ae000 c39ae000 c39d5e6c c39d5e48 5e40: c008cf84 c008ce38 c0083eec c007f7a0 00000001 ffffff9c 00020021 c39ae000 5e60: c39d5f24 c39d5e70 c008dcbc c008cf20 c3973480 c39bdc0c c39d5f84 00000817 5e80: c033077c 00000000 60000013 00000000 c3973480 c39a4420 c38ef180 c3401e00 5ea0: c39d5ebc c39d5eb0 c004ca38 00000101 00000001 00000001 c0028714 00000000 5ec0: c388f500 00000000 00000000 00103000 c002f85c c033070c 001e5ff8 00020021 5ee0: 00000000 c38ef980 00000000 001e600f c39d5fac c39d5f00 00000000 00000000 5f00: c39ae000 c39d4000 c383ec00 001e5234 c39d5fb0 001e5224 c39d5f44 c39d5f28 5f20: c00881b0 c008dc20 00000021 c004e11c 00000000 c39ae000 c39d5f84 c39d5f48 5f40: c0088698 c0088194 001e525c 00000001 001e5234 00000000 c39d5f84 c39ae000 5f60: 001e5224 001e5234 c39d5fb0 c0022008 c39d4000 00000000 c39d5fa4 c39d5f88 5f80: c00252c0 c00885fc 001e5224 00000000 001e525c 0000000b 00000000 c39d5fa8 5fa0: c0021e60 c0025294 001e5224 00000000 001e525c 001e5224 001e5234 001e3338 5fc0: 001e5224 00000000 001e525c 0000000b 001e44c0 001e44c0 001e5234 001e4fa8 5fe0: 001e5269 bec227d8 0005d710 0010fdb8 60000010 001e525c 342e3172 65722e00 Backtrace: [] (__kmalloc+0x0/0xd8) from [] (yaffs_CloneString+0x3c/0x50) r8:00000000 r7:c39d5e98 r6:00000000 r5:c38ec5c0 r4:c340c280 [] (yaffs_CloneString+0x0/0x50) from [] (yaffs_GetSymlinkAlias+0x30/0x38) r5:c380c000 r4:c340c280 [] (yaffs_GetSymlinkAlias+0x0/0x38) from [] (yaffs_follow_link+0x34/0x6c) [] (yaffs_follow_link+0x0/0x6c) from [] (__link_path_walk+0x8dc/0xe2c) r7:c39d5e98 r6:00000000 r5:c39ae006 r4:c340bdd0 [] (__link_path_walk+0x0/0xe2c) from [] (path_walk+0x50/0xa0) [] (path_walk+0x0/0xa0) from [] (do_path_lookup+0x74/0x120) r7:c39ae000 r6:c39ae000 r5:00000001 r4:c39d5e98 [] (do_path_lookup+0x0/0x120) from [] (do_filp_open+0xac/0x7e8) r7:c39ae000 r6:00020021 r5:ffffff9c r4:00000001 [] (do_filp_open+0x0/0x7e8) from [] (open_exec+0x2c/0x94) [] (open_exec+0x0/0x94) from [] (do_execve+0xac/0x358) r5:c39ae000 r4:00000000 [] (do_execve+0x0/0x358) from [] (sys_execve+0x3c/0x5c) [] (sys_execve+0x0/0x5c) from [] (ret_fast_syscall+0x0/0x2c) r7:0000000b r6:001e525c r5:00000000 r4:001e5224 Code: e59c8090 e3540000 0a000010 e59c308c (e7942103) ---[ end trace 487270d63be02ede ]--- Segmentation fault ^@^C