AVaRICE version 2.13svn20141210, Mar  6 2016 17:51:25

Found JTAG ICE, serno: 070000005C3C
JTAG config starting.
Attempting synchronisation at bitrate 19200

command[0x01, 1]: 01 
recv: 0x1b
recv: 0x00
recv: 0x00
recv: 0x1c
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 28 bytes
read:  86 01 ff 27 07 00 ff 27 07 01 07 00 00 00 5c 3c 4a 54 41 47 49 43 45 6d 6b 49 49 00
recv: 0xc0
recv: 0xcb
CRC OK
Got message seqno 0 (command_sequence == 0)
response: 86 01 FF 27 07 00 FF 27 07 01 07 00 00 00 5C 3C 4A 54 41 47 49 43 45 6D 6B 49 49 00 
Found a device: JTAGICEmkII
Serial number:  07:00:00:00:5c:3c
JTAG ICE mkII sign-on message:
Communications protocol version: 1
M_MCU:
  boot-loader FW version:        255
  firmware version:              7.39
  hardware version:              0
S_MCU:
  boot-loader FW version:        255
  firmware version:              7.39
  hardware version:              1

command[0x02, 1]: 02 03 00 
recv: 0x1b
recv: 0x01
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0xcd
recv: 0x83
CRC OK
Got message seqno 1 (command_sequence == 1)
response: 80 

command[0x0a, 1]: 0A 01 
recv: 0x1b
recv: 0x02
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0x1d
recv: 0x09
CRC OK
Got message seqno 2 (command_sequence == 2)
response: 80 
recv: 0x1b
recv: 0xff
recv: 0xff
recv: 0x06
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 6 bytes
read:  e0 00 00 00 00 00
recv: 0x4e
recv: 0x2d
CRC OKAutomatic device detection: 
command[0x03, 1]: 03 1D 
recv: 0x1b
recv: 0x03
recv: 0x00
recv: 0x03
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 3 bytes
read:  81 0f 95
recv: 0x50
recv: 0x85
CRC OK
Got message seqno 3 (command_sequence == 3)
response: 81 0F 95 
Reported debugWire device ID: 0x950F
Configured for device ID: 0x950F atmega328p

command[0x0c, 1]: 0C F8 0F E0 F8 FF 3D B9 E0 00 00 00 00 00 00 00 00 B0 0D 00 E0 FF 1D B8 E0 00 00 00 00 00 00 00 00 53 FB 01 DF F7 0F 00 00 00 00 5F 3F 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FB 01 D8 F7 0F 00 00 00 00 5F 2F 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 04 00 3F 00 00 C6 00 00 80 00 00 BD F2 BD E1 BB CF B4 00 BE 01 B6 01 BC 00 BB BF 99 F9 BB AF B6 01 11 3E 3D 00 01 31 00 00 00 3F 01 00 00 01 00 00 00 00 1F 00 
recv: 0x1b
recv: 0x04
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0xac
recv: 0x14
CRC OK
Got message seqno 4 (command_sequence == 4)
response: 80 
JTAG config complete.
Preparing the target device for On Chip Debugging.

command[0x0a, 1]: 0A 01 
recv: 0x1b
recv: 0x05
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0x13
recv: 0x95
CRC OK
Got message seqno 5 (command_sequence == 5)
response: 80 
recv: 0x1b
recv: 0xff
recv: 0xff
recv: 0x06
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 6 bytes
read:  e0 00 00 00 00 00
recv: 0x4e
recv: 0x2d
CRC OK
command[0x06, 1]: 06 00 00 00 00 
recv: 0x1b
recv: 0x06
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0xc3
recv: 0x1f
CRC OK
Got message seqno 6 (command_sequence == 6)
response: 80 

command[0x02, 1]: 02 09 00 
recv: 0x1b
recv: 0x07
recv: 0x00
recv: 0x01
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 1 bytes
read:  80
recv: 0x7c
recv: 0x9e
CRC OK
Got message seqno 7 (command_sequence == 7)
response: 80 
Waiting for connection on port 4242.
Connection opened by host 127.0.0.1, port 52744.
GDB: <qSupported:multiprocess+;swbreak+;hwbreak+;xmlRegisters=i386;qRelocInsn+;fork-events+;vfork-events+>
->GDB: qXfer:memory-map:read+
GDB: <!>
->GDB: OK
GDB: <Hg0>
->GDB: 
GDB: <qTStatus>
->GDB: 
GDB: <?>
->GDB: S05
GDB: <qfThreadInfo>
->GDB: 
GDB: <qL1200000000000000000>
->GDB: 
GDB: <Hc-1>
->GDB: 
GDB: <qC>
->GDB: 
GDB: <qAttached>
->GDB: 
GDB: <g>

GDB: (Registers)Read 32 bytes from 0x800000
jtagRead 
command[0x05, 1]: 05 20 20 00 00 00 00 00 00 00 
recv: 0x1b
recv: 0x08
recv: 0x00
recv: 0x21
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 33 bytes
read:  82 c0 00 ff ff ff ff ff ff ff ff 92 00 46 00 fe 03 42 04 aa 01 00 00 aa 01 aa 01 00 00 a5 08 5d 08
recv: 0x8d
recv: 0xc9
CRC OK
Got message seqno 8 (command_sequence == 8)
response: 82 C0 00 FF FF FF FF FF FF FF FF 92 00 46 00 FE 03 42 04 AA 01 00 00 AA 01 AA 01 00 00 A5 08 5D 08 
jtagRead 
command[0x05, 1]: 05 20 03 00 00 00 5D 00 00 00 
recv: 0x1b
recv: 0x09
recv: 0x00
recv: 0x04
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 4 bytes
read:  82 a5 08 c2
recv: 0x31
recv: 0xb9
CRC OK
Got message seqno 9 (command_sequence == 9)
response: 82 A5 08 C2 

command[0x07, 1]: 07 
recv: 0x1b
recv: 0x0a
recv: 0x00
recv: 0x05
recv: 0x00
recv: 0x00
recv: 0x00
recv: 0x0e
sDATA: reading 5 bytes
read:  84 00 00 00 00
recv: 0x50
recv: 0x43
CRC OK
Got message seqno 10 (command_sequence == 10)
response: 84 00 00 00 00 
PC = 0
->GDB: c000ffffffffffffffff92004600fe034204aa010000aa01aa010000a5085d08c2a50800000000
GDB: <qL1200000000000000000>
->GDB: 
GDB: <qXfer:memory-map:read::0,28b>
->GDB: l<memory-map>
  <memory type="ram" start="0x800000" length="0x20000" />
  <memory type="flash" start="0" length="0x8000">
     <property name="blocksize">0x80</property>
  </memory>
</memory-map>

GDB: <qL1200000000000000000>
->GDB: 
GDB: <qL1200000000000000000>
->GDB: 
GDB: <qL1200000000000000000>
->GDB: 
GDB: <qL1200000000000000000>
->GDB: