Bit Time Calculations for the Microchip CAN |
Setup Criteria |
Oscilator Frequency | 8,000 MHz |
Target CAN Bus Baud Rate | 125,000 kbps |
Selected Options |
BRP-1 (Baud Rate Prescaler) | 3 |
Tq (Time Quanta) | 1,000 µs |
Number of Time Quanta | 8 |
% Error of Target Baud Rate | 0,0 % |
Bit Timing Setup in Tq |
Propagation Delay | 1 |
Phase Segment 1 | 3 |
Phase Segment 2 | 3 |
Syncronization Jump Width (SJW) | 1 |
Multiple bit sampling is off. Wakeup filter is off.
Bit Timing Diagram
Configuration Register Setup (PIC18/MCP251X) (neoVI blue/green, ValueCAN 2) |
Register | Binary | Hexadecimal |
CNF1/BRGCON1 | b'00000011' | 0x03 |
CNF2/BRGCON2 | b'10010000' | 0x90 |
CNF3/BRGCON3 | b'00000010' | 0x02 |
Configuration Register Setup (dsPIC33F,PIC24H,dsPIC30) (neoVI Red/Fire/Test/Yellow/ECU, ValueCAN 3) |
Register | Binary | Hexadecimal |
CICFG1 | b'0000000000000011' | 0x0003 |
CICFG2 | b'0000001010010000' | 0x0290 |
Generated 12:33:57 pm 09.07.2016
Microchip CAN Bit Timing Calculator by Intrepid Control
Systems, Inc. ( www.intrepidcs.com )