#daemon configuration telnet_port 4444 gdb_port 3333 #interface interface ft2232 ft2232_device_desc "Olimex OpenOCD JTAG TINY A" ft2232_layout "olimex-jtag" ft2232_vid_pid 0x15BA 0x0004 jtag_speed 3 #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst separate #jtag scan chain #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) jtag_device 4 0x1 0xf 0xe #target configuration daemon_startup reset #target #target arm7tdmi target arm7tdmi little run_and_init 0 arm7tdmi-s_r4 run_and_halt_time 0 30 target_script 0 reset flash2148.script working_area 0 0x40000000 0x40000 nobackup #flash configuration flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 12000 calc_checksum # For more information about the configuration files, take a look at: # http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger ..... arm7_9 dcc_downloads enable wait_halt sleep 10 poll flash probe 0 # erase first bank only: flash erase 0 0 0 # erase all banks: #flash erase 0 0 26 flash write_image main.elf 0x0 elf reset run sleep 10 shutdown