cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.245941 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250693 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.245383 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.248549 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.248549 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.250132 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.243243 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.243243 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246408 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.244825 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected The detected STM32 firmware version (V2.J17) is compatible with PC software but is not the most recent one The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected The detected STM32 firmware version (V2.J17) is compatible with PC software but is not the most recent one The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected The detected STM32 firmware version (V2.J17) is compatible with PC software but is not the most recent one The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. Target voltage detected: 3.239762 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected The detected STM32 firmware version (V2.J17) is compatible with PC software but is not the most recent one The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. The detected STM32 firmware version (V2.J17) does not support the SWCLK frequency selection. Default frequency kept. Target voltage detected: 3.239762 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode Error (0x16) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 Error (0x16) after target cmd F2 35 04 20 04 E0 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.239762 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65558) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65558) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65558) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.245654 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.244061 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.244061 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.244061 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65558) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65558) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65558) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.239762 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.239762 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.239762 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.239762 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure W at 0xe0042004: 0x00000000 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.239762 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F2 36 04 20 04 E0 00 00 00 00 W at 0xe0042004: 0x00000000 USB communication error (65657) after target cmd F2 35 04 20 04 E0 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.242943 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.241352 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.243800 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure The detected STM32 firmware version (V0.J0) does not support the DAP read command. ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure USB communication error (65567) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.248549 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.248549 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode ST-Link/V2 device detected Target voltage detected: 3.246966 Driving NRST low Error getting target IDCODE: if SWD, check SWD connection Error (4) while initializing ST-Link in SWD mode USB communication error (65567) after target cmd F2 45 00 00 FC 00 00 00 00 00 USB communication error (65657) after target cmd F5 00 00 00 00 00 00 00 00 00 cErrLog::SetLogTraceOn STLinkUSBDriver.dll loaded USB communication error (65657) after target cmd F1 80 00 00 00 00 00 00 00 00 ST-Link get version failure