12:05:25.503 -> 
12:05:25.503 -> ╔════════════════════════════════════════════╗
12:05:25.535 -> ║    PY32F030 SYSTEM & DEBUG INFORMATION    ║
12:05:25.535 -> ╚════════════════════════════════════════════╝
12:05:25.535 -> 
12:05:25.535 -> [DEVICE IDENTIFICATION]
12:05:25.535 -> IDCODE        : 0x60001000
12:05:25.535 -> Device ID     : 0x000 (Unknown)
12:05:25.535 -> Revision      : 0x6000 (Unknown)
12:05:25.535 -> 
12:05:25.535 -> [UNIQUE DEVICE ID - 96 bit]
12:05:25.569 -> UID[31:0]     : 0x4150344C
12:05:25.569 -> UID[63:32]    : 0x3731370C
12:05:25.569 -> UID[95:64]    : 0x00CCC444
12:05:25.569 -> Serial Number : 00CCC444-3731370C-4150344C
12:05:25.569 -> 
12:05:25.569 -> [MEMORY CONFIGURATION]
12:05:25.569 -> Flash Size    : 55 KB
12:05:25.569 -> RAM Size      : 0 KB (estimated)
12:05:25.569 -> Flash Base    : 0x08000000
12:05:25.569 -> RAM Base      : 0x20000000
12:05:25.569 -> 
12:05:25.569 -> [CLOCK CONFIGURATION]
12:05:25.569 -> RCC_CR        : 0x00000500
12:05:25.569 -> RCC_ICSCR     : 0x010A72F2
12:05:25.569 -> RCC_CFGR      : 0x00000000
12:05:25.569 -> Clock Source  : HSI (Internal 8MHz/24MHz)
12:05:25.602 -> System Clock  : 24000000 Hz (24 MHz)
12:05:25.602 -> HSI Ready     : No
12:05:25.602 -> HSE Ready     : No
12:05:25.602 -> PLL Ready     : No
12:05:25.602 -> 
12:05:25.602 -> [DEBUG CONFIGURATION]
12:05:25.602 -> DBGMCU_CR     : 0x00000000
12:05:25.602 -> 
12:05:25.602 -> Debug Configuration (CR):
12:05:25.602 ->   DBG_STOP       : Disabled
12:05:25.602 ->   DBG_STANDBY    : Disabled
12:05:25.602 -> 
12:05:25.602 -> APB Peripheral Freeze (Debug Mode):
12:05:25.602 ->   APB_FZ1: 0x00000000
12:05:25.602 ->   APB_FZ2: 0x00000000
12:05:25.602 -> 
12:05:25.602 -> [RUNTIME INFORMATION]
12:05:25.635 -> Uptime        : 649 ms
12:05:25.635 -> Free Heap     : N/A (bare metal)
12:05:25.635 -> 
12:05:25.635 -> [FACTORY CALIBRATION]
12:05:25.635 -> VREFINT Cal   : 0 (@ 3.3V)
12:05:25.635 -> Temp Cal      : 0 (@ 30°C)
12:05:25.635 -> 
12:05:25.635 -> ╚════════════════════════════════════════════╝