1 | #ifndef LCD_H
|
2 | #define LCD_H
|
3 | /*************************************************************************
|
4 | Title : C include file for the HD44780U LCD library (lcd.c)
|
5 | Author: Peter Fleury <pfleury@gmx.ch> http://jump.to/fleury
|
6 | File: $Id: lcd.h,v 1.12.2.2 2004/02/12 21:05:59 peter Exp $
|
7 | Software: AVR-GCC 3.3
|
8 | Hardware: any AVR device, memory mapped mode only for AT90S4414/8515/Mega
|
9 |
|
10 | Enhancements: additional functions Thomas Radetzki 2005
|
11 | 4 lines/2 proc display Thomas Radetzki 2/2006
|
12 | ***************************************************************************/
|
13 |
|
14 | /**
|
15 | @defgroup pfleury_lcd LCD library
|
16 | @code #include <lcd.h> @endcode
|
17 |
|
18 | @brief Basic routines for interfacing a HD44780U-based text LCD display
|
19 |
|
20 | Originally based on Volker Oth's LCD library,
|
21 | changed lcd_init(), added additional constants for lcd_command(),
|
22 | added 4-bit I/O mode, improved and optimized code.
|
23 |
|
24 | Library can be operated in memory mapped mode (LCD_IO_MODE=0) or in
|
25 | 4-bit IO port mode (LCD_IO_MODE=1). 8-bit IO port mode not supported.
|
26 |
|
27 | Memory mapped mode compatible with Kanda STK200, but supports also
|
28 | generation of R/W signal through A8 address line.
|
29 |
|
30 | @author Peter Fleury pfleury@gmx.ch http://jump.to/fleury
|
31 |
|
32 | @see The chapter <a href="http://homepage.sunrise.ch/mysunrise/pfleury/avr-lcd44780.html" target="_blank">Interfacing a HD44780 Based LCD to an AVR</a>
|
33 | on my home page.
|
34 |
|
35 | */
|
36 |
|
37 | /*@{*/
|
38 |
|
39 | #if (__GNUC__ * 100 + __GNUC_MINOR__) < 303
|
40 | #error "This library requires AVR-GCC 3.3 or later, update to newer AVR-GCC compiler !"
|
41 | #endif
|
42 |
|
43 | #include <inttypes.h>
|
44 | #include <avr/pgmspace.h>
|
45 |
|
46 | /**
|
47 | * @name Definitions for MCU Clock Frequency
|
48 | * Adapt the MCU clock frequency in Hz to your target.
|
49 | */
|
50 | //#define XTAL 1000000 /**< clock frequency in Hz, used to calculate delay timer */
|
51 | #define XTAL F_CPU /**< clock frequency in Hz, used to calculate delay timer */
|
52 |
|
53 | /* should RW Pin be used ? */
|
54 | #define LCD_RW_PIN_USED 1 /** 0: not used 1: used */
|
55 |
|
56 |
|
57 | /**
|
58 | * @name Definitions for Display Size
|
59 | * Change these definitions to adapt setting to your display
|
60 | */
|
61 | #define LCD_LINES 4 /**< number of visible lines of the display */
|
62 | #define LCD_PROCS 2 /* 2 Procs. One for upper half, one for lower half. */
|
63 | #define LCD_DISP_LENGTH 27 /**< visibles characters per line of the display */
|
64 | #define LCD_LINE_LENGTH 0x40 /**< internal line length of the display */
|
65 | #define LCD_START_LINE1 0x00 /**< DDRAM address of first char of line 1 */
|
66 | #define LCD_START_LINE2 0x40 /**< DDRAM address of first char of line 2 */
|
67 | #define LCD_START_LINE3 0x14 /**< DDRAM address of first char of line 3 */
|
68 | #define LCD_START_LINE4 0x54 /**< DDRAM address of first char of line 4 */
|
69 | #define LCD_WRAP_LINES 0 /**< 0: no wrap, 1: wrap at end of visibile line */
|
70 |
|
71 |
|
72 | #define LCD_IO_MODE 1 /**< 0: memory mapped mode, 1: IO port mode */
|
73 | #if LCD_IO_MODE
|
74 | /**
|
75 | * @name Definitions for 4-bit IO mode
|
76 | * Change LCD_PORT if you want to use a different port for the LCD pins.
|
77 | *
|
78 | * The four LCD data lines and the three control lines RS, RW, E can be on the
|
79 | * same port or on different ports.
|
80 | * Change LCD_RS_PORT, LCD_RW_PORT, LCD_E_PORT if you want the control lines on
|
81 | * different ports.
|
82 | *
|
83 | * Normally the four data lines should be mapped to bit 0..3 on one port, but it
|
84 | * is possible to connect these data lines in different order or even on different
|
85 | * ports by adapting the LCD_DATAx_PORT and LCD_DATAx_PIN definitions.
|
86 | *
|
87 | */
|
88 | #define LCD_PORT PORTD /**< port for the LCD lines */
|
89 | #define LCD_DATA0_PORT LCD_PORT /**< port for 4bit data bit 0 */
|
90 | #define LCD_DATA1_PORT LCD_PORT /**< port for 4bit data bit 1 */
|
91 | #define LCD_DATA2_PORT LCD_PORT /**< port for 4bit data bit 2 */
|
92 | #define LCD_DATA3_PORT LCD_PORT /**< port for 4bit data bit 3 */
|
93 | #define LCD_DATA0_PIN 7 /**< pin for 4bit data bit 0 */
|
94 | #define LCD_DATA1_PIN 6 /**< pin for 4bit data bit 1 */
|
95 | #define LCD_DATA2_PIN 5 /**< pin for 4bit data bit 2 */
|
96 | #define LCD_DATA3_PIN 4 /**< pin for 4bit data bit 3 */
|
97 | #define LCD_RS_PORT LCD_PORT /**< port for RS line */
|
98 | #define LCD_RS_PIN 0 /**< pin for RS line */
|
99 | #define LCD_RW_PORT LCD_PORT /**< port for RW line */
|
100 | #define LCD_RW_PIN 1 /**< pin for RW line */
|
101 | #define LCD_E_PORT LCD_PORT /**< port for Enable line */
|
102 | #define LCD_E_PIN 2 /**< pin for Enable line */
|
103 | #define LCD_E2_PIN 3 /**< pin for Enable line */
|
104 |
|
105 |
|
106 | #elif defined(__AVR_AT90S4414__) || defined(__AVR_AT90S8515__) || defined(__AVR_ATmega64__) || \
|
107 | defined(__AVR_ATmega8515__)|| defined(__AVR_ATmega103__) || defined(__AVR_ATmega128__) || \
|
108 | defined(__AVR_ATmega161__) || defined(__AVR_ATmega162__)
|
109 | /*
|
110 | * memory mapped mode is only supported when the device has an external data memory interface
|
111 | */
|
112 | #define LCD_IO_DATA 0xC000 /* A15=E=1, A14=RS=1 */
|
113 | #define LCD_IO_FUNCTION 0x8000 /* A15=E=1, A14=RS=0 */
|
114 | #define LCD_IO_READ 0x0100 /* A8 =R/W=1 (R/W: 1=Read, 0=Write */
|
115 | #else
|
116 | #error "external data memory interface not available for this device, use 4-bit IO port mode"
|
117 |
|
118 | #endif
|
119 |
|
120 |
|
121 | /**
|
122 | * @name Definitions for LCD command instructions
|
123 | * The constants define the various LCD controller instructions which can be passed to the
|
124 | * function lcd_command(), see HD44780 data sheet for a complete description.
|
125 | */
|
126 |
|
127 | /* instruction register bit positions, see HD44780U data sheet */
|
128 | #define LCD_CLR 0 /* DB0: clear display */
|
129 | #define LCD_HOME 1 /* DB1: return to home position */
|
130 | #define LCD_ENTRY_MODE 2 /* DB2: set entry mode */
|
131 | #define LCD_ENTRY_INC 1 /* DB1: 1=increment, 0=decrement */
|
132 | #define LCD_ENTRY_SHIFT 0 /* DB2: 1=display shift on */
|
133 | #define LCD_ON 3 /* DB3: turn lcd/cursor on */
|
134 | #define LCD_ON_DISPLAY 2 /* DB2: turn display on */
|
135 | #define LCD_ON_CURSOR 1 /* DB1: turn cursor on */
|
136 | #define LCD_ON_BLINK 0 /* DB0: blinking cursor ? */
|
137 | #define LCD_MOVE 4 /* DB4: move cursor/display */
|
138 | #define LCD_MOVE_DISP 3 /* DB3: move display (0-> cursor) ? */
|
139 | #define LCD_MOVE_RIGHT 2 /* DB2: move right (0-> left) ? */
|
140 | #define LCD_FUNCTION 5 /* DB5: function set */
|
141 | #define LCD_FUNCTION_8BIT 4 /* DB4: set 8BIT mode (0->4BIT mode) */
|
142 | #define LCD_FUNCTION_2LINES 3 /* DB3: two lines (0->one line) */
|
143 | #define LCD_FUNCTION_10DOTS 2 /* DB2: 5x10 font (0->5x7 font) */
|
144 | #define LCD_CGRAM 6 /* DB6: set CG RAM address */
|
145 | #define LCD_DDRAM 7 /* DB7: set DD RAM address */
|
146 | #define LCD_BUSY 7 /* DB7: LCD is busy */
|
147 |
|
148 | /* set entry mode: display shift on/off, dec/inc cursor move direction */
|
149 | #define LCD_ENTRY_DEC 0x04 /* display shift off, dec cursor move dir */
|
150 | #define LCD_ENTRY_DEC_SHIFT 0x05 /* display shift on, dec cursor move dir */
|
151 | #define LCD_ENTRY_INC_ 0x06 /* display shift off, inc cursor move dir */
|
152 | #define LCD_ENTRY_INC_SHIFT 0x07 /* display shift on, inc cursor move dir */
|
153 |
|
154 | /* display on/off, cursor on/off, blinking char at cursor position */
|
155 | #define LCD_DISP_OFF 0x08 /* display off */
|
156 | #define LCD_DISP_ON 0x0C /* display on, cursor off */
|
157 | #define LCD_DISP_ON_BLINK 0x0D /* display on, cursor off, blink char */
|
158 | #define LCD_DISP_ON_CURSOR 0x0E /* display on, cursor on */
|
159 | #define LCD_DISP_ON_CURSOR_BLINK 0x0F /* display on, cursor on, blink char */
|
160 |
|
161 | /* move cursor/shift display */
|
162 | #define LCD_MOVE_CURSOR_LEFT 0x10 /* move cursor left (decrement) */
|
163 | #define LCD_MOVE_CURSOR_RIGHT 0x14 /* move cursor right (increment) */
|
164 | #define LCD_MOVE_DISP_LEFT 0x18 /* shift display left */
|
165 | #define LCD_MOVE_DISP_RIGHT 0x1C /* shift display right */
|
166 |
|
167 | /* function set: set interface data length and number of display lines */
|
168 | #define LCD_FUNCTION_4BIT_1LINE 0x20 /* 4-bit interface, single line, 5x7 dots */
|
169 | #define LCD_FUNCTION_4BIT_2LINES 0x28 /* 4-bit interface, dual line, 5x7 dots */
|
170 | #define LCD_FUNCTION_8BIT_1LINE 0x30 /* 8-bit interface, single line, 5x7 dots */
|
171 | #define LCD_FUNCTION_8BIT_2LINES 0x38 /* 8-bit interface, dual line, 5x7 dots */
|
172 |
|
173 |
|
174 | #define LCD_MODE_DEFAULT ((1<<LCD_ENTRY_MODE) | (1<<LCD_ENTRY_INC) )
|
175 |
|
176 |
|
177 |
|
178 | /**
|
179 | * @name Functions
|
180 | */
|
181 |
|
182 |
|
183 | /**
|
184 | @brief Initialize display and select type of cursor
|
185 | @param dispAttr \b LCD_DISP_OFF display off\n
|
186 | \b LCD_DISP_ON display on, cursor off\n
|
187 | \b LCD_DISP_ON_CURSOR display on, cursor on\n
|
188 | \b LCD_DISP_ON_CURSOR_BLINK display on, cursor on flashing
|
189 | @return none
|
190 | */
|
191 | extern void lcd_init(uint8_t dispAttr);
|
192 |
|
193 |
|
194 | /**
|
195 | @brief Clear display and set cursor to home position
|
196 | @param void
|
197 | @return none
|
198 | */
|
199 | extern void lcd_clrscr(void);
|
200 |
|
201 |
|
202 | /**
|
203 | @brief Set cursor to home position
|
204 | @param void
|
205 | @return none
|
206 | */
|
207 | extern void lcd_home(void);
|
208 |
|
209 |
|
210 | /**
|
211 | @brief Set cursor to specified position
|
212 |
|
213 | @param x horizontal position\n (0: left most position)
|
214 | @param y vertical position\n (0: first line)
|
215 | @return none
|
216 | */
|
217 | extern void lcd_gotoxy(uint8_t x, uint8_t y);
|
218 |
|
219 |
|
220 | /**
|
221 | @brief Display character at current cursor position
|
222 | @param c character to be displayed
|
223 | @return none
|
224 | */
|
225 | extern void lcd_putc(char c);
|
226 |
|
227 |
|
228 | /**
|
229 | @brief Display string without auto linefeed
|
230 | @param s string to be displayed
|
231 | @return none
|
232 | */
|
233 | extern void lcd_puts(const char *s);
|
234 |
|
235 | /**
|
236 | @brief Display number as Hex Value without auto linefeed
|
237 | @param int to be displayed
|
238 | @return none
|
239 | */
|
240 | extern void lcd_put_h(const int data);
|
241 |
|
242 | /**
|
243 | @brief Display number as Dec Value without auto linefeed
|
244 | @param int to be displayed
|
245 | @return none
|
246 | */
|
247 | extern void lcd_put_d(const int data);
|
248 |
|
249 |
|
250 | /**
|
251 | @brief Display string from program memory without auto linefeed
|
252 | @param s string from program memory be be displayed
|
253 | @return none
|
254 | @see lcd_puts_P
|
255 | */
|
256 | extern void lcd_puts_p(const char *progmem_s);
|
257 |
|
258 |
|
259 | /**
|
260 | @brief Send LCD controller instruction command
|
261 | @param cmd instruction to send to LCD controller, see HD44780 data sheet
|
262 | @return none
|
263 | */
|
264 | extern void lcd_command(uint8_t cmd);
|
265 |
|
266 |
|
267 | /**
|
268 | @brief New line or first line if already last line
|
269 | @param none
|
270 | @return none
|
271 | */
|
272 | void lcd_New_Line(void);
|
273 |
|
274 |
|
275 |
|
276 |
|
277 | /**
|
278 | @brief macros for automatically storing string constant in program memory
|
279 | */
|
280 | #define lcd_puts_P(__s) lcd_puts_p(PSTR(__s))
|
281 |
|
282 | /*@}*/
|
283 |
|
284 |
|
285 |
|
286 | #endif //LCD_H
|