to ~400 V DC. 2. Connect a lab supply of 18 V with a current limit of ~300 mA to the input of the L78M15 (+ and GND). 3. The LF33 has its own winding, so it would get no voltage on the bench. Add a jumper from the L78M05 output (pin 3) to the LF33 input (pin 1). Remove the jumper after the test ;) 4. Healthy board: L78M15 = 15 V, L78M05 = 5 V, LF33 = 3.3 V. The upper LED blinks quickly a few times, then the lower LED blinks slowly. Current draw at 18 V is ~0.10 A with the processor stopped and ~0.14 A when it runs