-
Thread
ATMega16u2 auslöten geht nicht, warum?
signature. avrdude: Expected signature for ATmega16U2 is 1E 94 89 avrdude: safemode: hfuse reads as 0 avrdude: safemode: efuse reads as 0 avrdude: reading lfuse memory: Reading | ################################################## | 100% 0.32s avrdude: writing output file "i" avrdude: error
format for i, specify explicitly avrdude: write to file 'i' failed avrdude: safemode: hfuse reads as 0 avrdude: safemode: efuse reads as 0 avrdude: safemode: Fuses OK (E:00, H:00, L:00) avrdude done. Thank you. [/code] Als nächstes mal mit dem Oszi den Quarz prüfen.
-
Thread
UV-Laserdrucker II
diese: http://ams.com/eng/Products/Position-Sensors/Linear-Incremental-Magnetic-Position-Sensors/AS5304 Magnetic Strip: http://ams.com/eng/Products/Position-Sensors/Magnets/AS5000-MS20-150 Die AS5304 AS5306 AS5311 ICs gibts bei HBE/Farnell, Digikey, Mouser aber für die Magnetic Pole Strips hab
Das ist ein magnetischer Linearencoder mit zugehörigem Magnetband. Das sind AS5304 von AMS.
-
Thread
RFID Türöffner
after 5 sec LED is switched off. I used tag TK-4100 (EM4100 standard) witch is the same standard as EM4102, by my opinion. Is the problem in HEX file or is something else? Please help me, I don't have any more ideas!
you LinuxMint I now learn something new. after I change FUSES, Mikrocontroller is start to work as you say. But, than I change some other fuse and now my programmer can't access to the mikrocontroller. What's happened,is it dead or locked?
-
Thread
China Bastlerkram, wie schaffen die ihre Preise?
recycled from older cell phones so they often have tiny nicks or scratches. There's no such thing as a 'new' Nokia 5110 display, but the scratches are not noticeable when in use.
mehr. Da gibt es eine tolle Power Point die mal jemand zu diesem Thema gemacht hat, der hat sichd as vor Ort angeschaut.
-
Thread
MOSFET Class-A Endstufe, Ruhestrom Einstellung
shift is, as a result, virtually nonexistent. A complement of twenty output transistors and a power supply anchored by a massive 1.4kW toroidal transformer ensure tremendous current capability and the ability to
our FETs’ datasheets to competitors’, be wary of the fact that they may not be as conservative. We have seen some vendors who are. We have seen others who publish the actual failure points and claim this as their guaranteed SOA. There is no industry standard and the truth is without
-
Thread
Modulo 60 Zähler
Wie aufwendig Synchronzähler sein können, ist gut am alten Datenblatt des SN74AS867 zu sehen, in dem die Innenschaltung abgebildet ist. Dieser Baustein wäre ideal, ist aber in der Aufgabe nicht erlaubt. Gibt ihn auch schon lange nicht mehr.
Beitrag #5856174: > Wie aufwendig Synchronzähler sein können, ist gut am alten Datenblatt > des SN74AS867 zu sehen, in dem die Innenschaltung abgebildet ist. Ja, deshalb kam von mir auch das Schaltbild mit dem ROM statt dem Gatterfriedhof. Den kann doch auch beim '193er keiner wirklich ernsthaft auf
-
Thread
Software Pwm auf 8 Pin´s mit Bascom
Config Portb = Output Config Timer0 = Timer , Prescale = 256 On Timer0 Timer_irq Nosave Dim X As Byte Dim Pwm_led(8) As Byte , Pwm_counter As Byte Dim Pwm_update As Byte For X = 1 To 8 Read Pwm_led(x) Next Enable Timer0 Enable Interrupts Portb = 255 Do If Pwm_update =
Config Portb = Output Config Timer0 = Timer , Prescale = 256 On Timer0 Timer_irq Nosave Dim X As Byte Dim Pwm_led(8) As Byte Dim Pwm_zeit(8) As Byte Dim Action As Byte Dim Zustand As Byte Dim Lcdwait As Byte Restore Helligkeit For X = 1 To 8 Read Pwm_zeit(x) Next Enable
-
Thread
Probleme mit dem richtigen setzten des sei() makros bei externem Interrupt ATmega16
ausgeführt. Das Programm schaut wie folgt aus: [c] void init(void) { DDRA = 0x00; //set PORTA as input PORTA = 0xFF; //pull-widerstände DDRD = _BV(PD5) | _BV(PD4); // set OC1A/B pin as output, required for output DDRB = _BV(PB3); // set OC0 pin as output TCCR1A = _BV(WGM10) | _BV
include <avr/interrupt.h> #include <util/delay.h> void init(void) { DDRA = 0x00; //set PORTA as input PORTA = 0xFF; //pull-widerstände DDRD = _BV(PD5) | _BV(PD4); // set OC1A/B pin as output, required for output DDRB = _BV(PB3); // set OC0 pin as output TCCR1A = _BV(WGM10) | _BV
-
Thread
Berker FunkBus (Funkschalter) 433Mhz Prüfsumme?
application, only the library for Funkbus. The library is simple to apply as all the software-tasks are separated with (free-rtos) queues. My own application currently serves a webpage to control the lights and is simultaniously a mqtt client that is connected to Home Assistant
have to wait for some cheap RF modules to arrive which I just ordered from eBay. I'll come back as soon as they arrive and I have tested to make hem work. Best regards David
-
Thread
Probleme mit Bascom
Hallöchen !! Sagt mal, warum kommt hierbei ein Fehler ? Dim X As Word Dim Y As Word Dim Z As Word Dim T As Word T = X + Y + Z <Fehlermeldung (Error 35) : 3 Parameters Expected Weiß jemand warum ? Gruß Jan
...... Dim X As Word Dim Y As Word Dim Z As Word Dim T As Word T = X + Y T = T + Z ..... das geht schon :-))) das gehemnis verrate ich nächstes mal :)))
-
Thread
Beschaltung um AudioSignal in uC zu bekommen
Enable Icp1 On Int0 Ontaster Config Int0 = Falling Enable Int0 Enable Interrupts Dim Zaehler As Word Dim Icr_neu As Word Dim Icr_alt As Word Dim Frequlong As Long Dim Frequenz As Word Dim A(5) As Word Dim Frequsumme As Word Dim Adizaehler As Integer Dim Durchschnitt As Word Dim Grenzeo As Word Dim Grenzeu As Word Dim Ton As String * 1 Dim Tonalt As String * 1 Dim Folge As String * 5 Dim Timeout As Word Main: Waitms 2 Frequlong = 8000000 / Icr_neu Icr_neu = 1 Frequenz
-
Thread
LM324 und LM358
*LM324* http://www.google.de/search?as_q=lm324&hl=de&num=10&btnG=Google-Suche&as_epq=&as_oq=&as_eq=&lr=&cr=&as_ft=i&as_filetype=pdf&as_qdr=all&as_occt=any&as_dt=i&as_sitesearch=&as_rights=&safe=images *LM358* http://www.google.de/search?as_q=lm358&hl=de&num=10&btnG=Google-Suche&as_epq=&as_oq=&as_eq=&lr=&cr=&as_ft=i&as_filetype=pdf&as_qdr=all&as_occt=any&as_dt=i&as_sitesearch=&as_rights=&safe=images
-
Thread
Daten sicher verteilen - Software - Verschlüsselung
Zumindest 7-Zip ermöglicht beim Zip-Archiv eine Verschlüsselung mit AES-256. Also ja: ist für deine Zwecke sicher genug. Das Problem ist dann doch wieder das Passwort zu verteilen, beziehungsweise sicher aufzubewahren. Viele Grüße.
Mit 7-Zip packen und verschlüsseln. https://www.7-zip.org - Strong AES-256 encryption in 7z and ZIP formats - Self-extracting capability for 7z format
-
Thread
BASCOM ADC Spannung in mV berechnen mit Kalibrierung ohne Fließkomma
Code-Idee: [code] Config Adc = Single , Prescaler = Auto , Reference = Internal_1.1 Dim N As Byte Dim Adc_messergebnis As Word 'Der ADC liefert 10 Bit, die passen nicht in 1 Byte (8 Bit), von daher Word (= 2 Byte, 16 Bit) Dim Millivolt As Single
Berechnung Const Adc_multipli = U_multimeter / Adc_wert ' = 4 . 467065 ' Variablen Dim N As Byte Dim Adc_messergebnis As Word Dim Millivolt_single As Single Dim Millivolt As Word ' Hauptprogramm Do ' Messen und Ergebnis berechnen Adc_messergebnis = Getadc(0) Millivolt_single
-
Thread
Projekt wird trotz Parser-Fehlern compiliert. Warum?
Parser-Fehler weg, bis auf einen: /home/joachim/Versuch/Test_1/mainwindow.h:12: warning: zero as null pointer constant Leider ist auf dem Screenshot nicht der Schwebetext des Mauszeigers drauf, der sagt was von Nullabillity issue und -Wzero-as-null-pointer-constant Sieht nach nem Compilerflag
denn am besten vor um herauszufinden wo und wie das Makefile gemacht wird um den Schalter -Wzero-as-null-pointer-constant rauszunehmen? Oder hat jemand ne bessere Strategie?
-
Thread
Frage zu Assemblercode TLCS-90, Fehler im Datenblatt
Dann würde sich der Code schön und > sinnvoll zu LD H, (n) übersetzen lassen. Der Assembler "AS" unterstützt den TLCS-90: http://john.ccac.rwth-aachen.de:8000/as/index.html Wenn man in code90c141.c reinschaut scheint es so zu sein wie Du vermutest. Laut der "AS" Doku war die Referenz
Dieter schrieb im Beitrag #6965177: > Der Assembler "AS" unterstützt den TLCS-90: > > http://john.ccac.rwth-aachen.de:8000/as/index.html > > Wenn man in code90c141.c reinschaut scheint es so zu > sein wie Du vermutest. > > Laut der "AS" Doku war
-
Thread
Neues für die DIP-Freunde
-- Timers with PWM generation - For each timer, up to four match registers can be configured as PWM, allowing each timer to support up to three match outputs as single edge controlled PWM outputs. -- Dynamic system clock switching - Change frequency on the fly depending on processing demand.
clock, IRC clock, CPU clock, and the Watchdog clock. The output can source downstream devices such as other microcontrollers, CPLD or FPGA. -- Interrupt via any GPIO - Any GPIO pins can be used as Edge- and Level-Sensitive interrupt sources. -- Programmable pull up/down/open drain - Internal pull-up
-
Thread
Ds18b20 wird von ATMega328P nicht erkannt
Ergebnisse: ' Für LCD-Display in 1/10-Grad, Dezimalpunkt immer gleiche Stelle Dim Text_temperatur As String * 8 ' Temperatur als Integerzahl dim Temperatur_int as integer Dim Array_1wire(10) As Byte Dim Temperatur As Integer At Array_1wire(2) Overlay ' Zahlen-Formatierung Dim T_vorzeichen As String * 1 Dim T_einer As String * 2 Dim T_punkt As String * 1 Dim T_zehntel As String * 1 Dim Merker_a As Integer Dim Merker_b As Integer ' '------------------------------------------------
-
Thread
ADC Auswertung mit Timer
Uu As Integer Dim H As Integer Dim P As String * 10 Disable Jtag Dim E As Integer Dim Hh As Integer Dim W As Integer Dim Rr As Integer Dim Ll As Integer Dim Hu As Integer Dim Huu As Integer Dim Hm As Integer Dim Hmm As Integer Dim Hs As Integer Dim Hss As Integer Dim K As Integer Dim Q As Integer Dim G As Integer Dim M As Integer Dim Ue As Integer Dim Iii As Integer Dim Ii As Integer Ii
-
Thread
Sleep-Funktion / Power Save
Power-down or Standby mode, the user should be aware of the fact that this Oscillator might take as long as one second to stabilize. The user is advised to wait for at least one second before using Timer/Counter2" Peter
sleep_enable(); ASSR = 1<<EXCLK; // use 32kHz from STK500 ASSR = 1<<AS2 | 1<<EXCLK; // When the value of AS2 is changed, // the contents of TCNT2, OCR2A, OCR2B, // TCCR2A and TCCR2B
-
Thread
Fusionsreaktor Wendelstein 7-X. Ein Schritt in die Zukunft?
dose contribution from 241Pu has to be estimated. As an example, assuming a similar contamination of 241Pu in the surface soil as that in the litter layer and using the method of IAEA-TECDOC-95524, we estimated the 241Pu dose for a person living for 50
liefert? ;-) > "In commercial power plants and research applications, plutonium > generally exists as plutonium oxide (PuO2), a stable ceramic material > with an extremely low solubility in water and with a high melting point > (2,390 ºC)." Selbst wenn das so ist, so hilft das nichts gegen das
-
Thread
www.Pollin.de ist [wohl doch nicht] DOWN
Jörg Wunsch schrieb im Beitrag #3721598: > Möglicherweise ist das komplette AS29178 betroffen, falls es mehr als > nur dieses eine Netz beinhaltet. Ich habe gerade keine Idee, wie man > die Inhalte der einzelnen ASe im Netz abfragen kann, wenn man nicht > selbst an einem BGP-eingebunden
Hat wohl nur dieses eine Netz, und einziger Peer scheint Telefonica zu sein: http://bgp.he.net/AS29178 Der route propagation graph sieht dann auch ziemlich mager aus. Zum Vergleich mal der von meinem eigenen ISP (tal.de).
-
Thread
Wie werden Dioden im Glasgehäuse hergestellt?
, a working point of less than about 1000 C., and a softening point of less than about 750 C, such as ... .... The entire assembly may then be. suitably heated for a brief period, such as seconds at about 850 to 950 C. This heating temperatur ... ... In practice it has been found, for example
constructed according to the pres-` ent invention and employing casings of glass, sealing temperatures as high as 950 C. are feasible, Without incurring any undesirable effects on the junction properties.... -------------------- Ergaenzend: Softening Point -> Erweichungstemperatur oder Littleton-Punkt
-
Thread
LED Leiste ansteuern
Register or Data Register (scan chains). When the JTAG interface is enabled, this pin can not be used as an I/O pin. • TDO – Port C, Bit 4 TDO, JTAG Test Data Out: Serial output data from Instruction Register or Data Register. When the JTAG interface is enabled, this pin can not be used as an I/O pin
through the TAP-controller state machine. When the JTAG interface is enabled, this pin can not be used as an I/O pin. • TCK – Port C, Bit 2 TCK, JTAG Test Clock: JTAG operation is synchronous to TCK. When the JTAG interface is enabled, this pin can not be used as an I/O pin. Ich konnte aber nicht
-
Thread
Wie AtMega8 mit Bascom programmieren
Timer , Prescale = 1024 On Timer0 Timer0_isr Enable Timer0 Enable Interrupts Dim Intervall As Integer , Blink_on As Integer Dim Led As Integer , Pin As Integer Const False = 0 Const True = 1 Main: Do If Blink_on = True And Intervall >= 3 Then Blink_on = False Intervall
-
Thread
Nexus 5 - Alternative für Mifare Classic (NFC-Tags)
DESFire und NTAG 203 alle mit dem gleichen "NFC-IC"? Weil einmal liest man was von 3DES Verschlüsslung, AES Verschlüsslung oder gar keiner Verschlüsslung!? Nur wie kommuniziere ich mit diesen Chips über einen einfachen 8-bitter wie den Atmega? Dazu fand ich bisher leider fast gar nichts brauchbares :(
Kalle schrieb im Beitrag #3395598: > Wo hast du AES gelesen? im Wiki Artikel von Mifare werden z.B. die "MIFARE Plus S", "MIFARE Plus X" und "MIFARE DESFire EV1" mit AES-128 Verschlüsslung angegeben. Bei einem 8bitter ist sowas in Software zu
-
Thread
Ethernet Buchse etwas entfernt vom PHY platzieren?
LAN9512/LAN9513/LAN9514 Layout Guidelines" Seite 20: "Differential pairs should be constructed as 100 Ohm, controlled impedance pairs" "Each trace of the differential pair should be matched in length." "The differential pairs should be as short in length as possible."
LAN9513/LAN9514 Layout Guidelines" >> >> Seite 20: >> "Differential pairs should be constructed as 100 Ohm, controlled >> impedance pairs" >> "Each trace of the differential pair should be matched in length." >> "The differential pairs should be as short in length as possible." > > Perfekt,
-
Thread
Passwortschutz im Microcontroller Debug Console
Alles klar, super! edit: Also könnte man beim Atmel SAM4 auch die interne AES nutzen? Würde dann wohl schneller laufen als eine Software-MD5, wahrscheinlich.
Beitrag #5125888: > Alles klar, super! > > edit: > Also könnte man beim Atmel SAM4 auch die interne AES nutzen? > Würde dann wohl schneller laufen als eine Software-MD5, wahrscheinlich. Man kann. Hat aber nicht die gleiche Wirkung. AES benötigt einen Schlüssel und ist der Schlüssel bekannt kann man
-
Thread
Feuchtigkeitssensor mit DHT11 und PIC16F1826
use external oscillator ANSELB = 0x00; // PORTB to digital TRISBbits.TRISB0 = 0; // LED as OUTPUT TRISBbits.TRISB1 = 0; // Sensor as output WARN_LED = 0; // LED off } void loop ( void ) { uint8_t data[5] = { 0 }; uint8_t result = Read_DHT( data ); if ( result
unsigned short Check, Temp, RH, Sum, Ch ; void StartSignal(){ TRISIO.F2 = 0; //Configure TRISIO.F2 as output GPIO.F2 = 0; //GP2 sends 0 to the sensor delay_ms(18); GPIO.F2 = 1; //GP2 sends 1 to the sensor delay_us(30); TRISIO.F2 = 1; //Configure TRISIO.F2 as input } ////////////
-
Thread
Torzeit mit Attiny2313
Portb.7 , E = Portb.2 , Rs = Portb.0 Config Lcd = 16 * 1 Initlcd Cursor Off Dim Timercounter As Word Dim Overflcounter As Word Dim Totalcounter As Long Dim T1 As Integer Dim T2 As Integer Dim M As Integer Dim Zeit As Long On Counter1 Uphigh Timercounter = 0 Totalcounter = 0 Zeit =
-
Thread
SDR als Spektrumanalysator?
voltage0 und voltage 1 entsprechen den beiden Kanälen I und Q. aus (4) "Discussing signals as quadrature or complex signal is taking advantage of the mathematical constructs that Euler and others have created to make analysis easier. We try to refer to signals as in-phase (I) and quadrature (Q) since that is actually pedantically correct. As described in Section 2.3.1, the in-phase (I) refers to the signal that is in the same phase as the local oscillator, and the quadrature (Q) refers to the part of the signal that is in phase with the
-
Thread
[V] Lightning Sensor Module mit AS3935
Hallo, verkaufe unbenutztes Modul. http://www.embeddedadventures.com/as3935_lightning_sensor_module_mod-1016.html 15 Euro inkl. Versand. Bei Interesse bitte PN Uli
-
Thread
NAND/FLASH USB Kontroller + AES
Guten Tag Icj bin auf der Suche nach einemn USB 2 oder 3 NAND/FLASH Kontroller, und der auch AES Hardware Verschlüsselung unterstützt. Also, anscheinend hat Initio den INIC-1861 aber er ist nicht auf ihrer homepage gelistet. Velosti hat auch einen, aber von einer Datasheet keine Spur. Kennt
-
Thread
AS5047P Positionssensor PWM Output
Hallo, ich möchte die Rotorposition eines BLDCs ermitteln. Die Positionserfassung soll sowohl bei Stillstand als auch bei hohen Drehzahlen (Größenordnung 10krpm) erfolgen. Für die Positionserfassung möchte ich den oben genannten Sensor verwenden. Laut Datenblatt sind Drehzahlen bis 28krpm möglich. Ich finde nicht alle Angaben über die PWM Ausgabe der Rotorposition. Mir ist nicht klar 1) wie hoch die PWM Frequenz ist 2) wie oft ich Positionsdaten über PWM pro Sekunde auslesen kann 3) wie oft die Positionsdaten intern im PWM Betrieb aktualisert werden Viele Grüße Andreas
-
Thread
Canton Ergo AS 2 - Kein Ton
hallo an alle hier bei mikrocontrol., es geht um meinen Canton Ergo AS 2 kommt nur noch ein Ton raus, und zwar wenn man den Poti für die Crossover Frequency fast auf anschlag dreht ! Beim Filme anschauen, seit ca. 2 Jahren, hat er auch nicht wirklich einen Bass
-
Thread
Can-lib in AS6.2 bauen
nicht nutzen zu wollen, mag sein. Deswegen findet man vielleicht auch wenig im Netz. Momentan ist AS noch mein Mittel der Wahl. Bin auch bereit das zu überdenken. - AS6.2 vorhanden - can-lib.zip von kreatives-chaos.com geladen - Neues Static Library Projekt angelegt - Quellen aus Ordner src eingefügt
universelle-can-bibliothek wird erklärt, wie man in AVR Studio baut (das ist sicher nicht dasselbe wie AS6.2, aber was will man machen): "Zuerst einmal muss die Bibliothek erstellt werden: Dazu ändert man im src/-Ordner die Datei ‘config.h’ für seine Konfiguration ab und stellt im Makefile den verwenden
-
Thread
[V] ISA Netzwerkkarten mit RTL8019AS
vielleicht hat jemand auch in den Zeiten des ENC28J60 noch Bedarf an Netzwerkkarten mit RTL8019AS-Chip. Habe hier 2 abzugeben. Hersteller ist mir nicht bekannt. Beide Karten verfügen über BNC- und RJ45-Steckverbinder. Als kleine Entschädigung für den zur Zeit auf Grund der Wetterlage recht beschwerlichen
-
Thread
Nut OS und RTL8019AS Pingprobleme
Hallo Gemeinde, - MMNET01 Nachbau (Ethernut1) - ATMEGA128 - Board mit RTL8019, Adresse 0xFF00 - RAM auf 0x8000-0xFEFF. - EEPROM Leitungen vom RTL nicht verbunden (EEDO hat Pull-up) Diese Parameter habe ich mit dem NutOS Konfigurator eingestellt. Verbunden habe ich das Board mit einem DLink Router. Beim Starten erhalte ich über die Debugschnittstelle: Nut/OS 4.8.9.0 HTTP Daemon...Configure eth0...initial boot...No DHCP...hard coded gate...OK 192.168.0.123 ready Pinge ich das Board an, dann leuchtet die RX-LED bei jedem Paket auf, auf dem Datenbus sehe ich den INT5 wie er erzeugt
-
Thread
[S] ISA-Netzwerkkarte mit RTL8019AS
Ich suche für meinen Nachbau des Webservers von Holger Buss 2 ISA Netzwerkkarten mit dem RTL 8019AS. Meine Schaltung ist mit ATmega32 und der Version 1.38 mit Sd-Karte aufgebaut. Eine Karte mít einem Controller "EAGLE 632183905001MX" wird zwar erkannt, (Init 34), aber ich kann sie nicht anpingen
-
Thread
Suche Datenblatt AS19AP28621
einem IC von ZhuHai LieLi Technology Co., Ltd http://www.zh-jieli.com/ Aufgelaserte Bezeichnung AS19AP28621-2884 Dazu dieses Logo, das wie ein J und ein L aussieht, die oben mit einem Strich verbunden sind und dadurch irgendwie einem Pi ähneln. Gehäuse ist ein etwas SO-20 artiges. Das Ding
-
Thread
SUCHE: Photomos-Relais PVT412AS
Hallo, hat jmd. zufällig 5 Stück PVT412AS übrig ? Bräuchte sie ganz dringend. Danke. Gruß Thorsten
-
Thread
China SUPER Bauteile-Schnäppchen Thread [V4]
400103%2C400401%2C200215223&jump=afs&SortType=price_asc&groupsort=1&isBigSale=n&CatId=0&initiative_id=AS_20190508000334&isViewCP=y > > Und dort ist der erste Hit > https://www.aliexpress.com/item/ESP32-Development-Board-Wireless-WiFi-Bluetooth-2-in-1-Dual-Core-CPU-Low-Power-ESP-32/32799969203.html
grain-of-wheat lamp is an unrelated, very small incandescent lamp >> used in medical and optical instruments, as well as for illuminating >> miniature railroad and similar models. "incandescent lamp" Also hatte Tim recht.
-
Thread
crc
Dim Polynom(4) As Long DIM Ergeb as Long Ergeb = Crc32(polynom(1) , 4)
die daten werden Xor verknüpft Function Docrc8(s As String) As Byte Dim j As Byte Dim k As Byte Dim crc8 As Byte crc8 = 0 For m = 1 To Len(s) x = Asc(Mid(s, m, 1)) For k = 0 To 7 j = 1 And (x Xor crc8) crc8 = Fix(crc8 / 2) And &HFF
-
Thread
KFZ Datenlogger, Serielle LCD Anzeige - Werte umrechnen und anderes Display nutzen
List<Byte> b = readdata(inStream); if (b.size() > 10) { EGTv = asUnsignedInt(b.get(5)) * 256 + asUnsignedInt(b.get(4)); AFRv = 1.0 * asUnsignedInt(b.get(3)) / 10.0; // MAP = (MAP(low) + MAP(high) * 256) / 10 Units inHg vacuum/PSI boost
} else { Boostv = asUnsignedInt(b.get(9)) * 256.0 + asUnsignedInt(b.get(8)); // conversion psi en bar Boostv = Boostv * 0.0068947573; }
-
Thread
TEMPEST/Van-Eck-Phreaking - SCHUTZMÖGLICHKEITEN
in den Kernel abgelehnt) mit vmware virtueller Maschine die oft zurückgesetzt wird, mit Truecrypt AES verschlüsselte Platten (PW natürlich mit über 25 Zeichen), Kaspersky + Brain.exe, NoScript, keine Browserplugins, https everywhere, Hardware Firewall die nur VPN Traffic durchlässt, dicken Passwörtern
einmal schaffen solltest, dass sich wirklich jemand > dafür interessiert was du tust - ein 256bit AES kann man mit den > ensprechenden Mitteln perfekt knacken. Da muss niemand deinen Bildschirm > lesen können. Da sitzt man in deinem AccessPoint drin und fertig. Aber > das ist alles sowieso Unsinn
-
Thread
Bits shiften - ich verstehe es nicht.
due to hardware idiosyncrasies // uint16_t bcd3(uint8_t first, uint8_t second) { // perform as many operations as possible with 8-bit uint8_t outl = 0; // Tenth (second byte high nibble) if (second & 0x80) outl += 80; if (second & 0x40) outl += 20; // \_ swapped if (second &
Stimmt, spart nochmal 4 Byte: [c] uint16_t bcd3(uint8_t first, uint8_t second) { // perform as many operations as possible with 8-bit uint8_t outl = second & 0x01; // Tenth (second byte high nibble) if (second & 0x80) outl += 80; if (second & 0x40) outl += 20; // \_ swapped
-
Thread
Adc soll Led zum leuchten bringen Bascom
Config Adc = Single , Prescaler = Auto , Reference = AVCC Start Adc Const Ref = 5 / 1024 Dim Raw As Word Dim V As Single Do Raw = Getadc(0) V = Raw * Ref Print "RAW: " ; Raw ; Spc(3) ; V ; "V" Wait 1 Loop
Config Adc = Single , Prescaler = Auto , Reference = Internal Start Adc Const Ref = 5 / 1024 Dim Raw As Word Dim V As Single Do Raw = Getadc(0) V = Raw * Ref Print "RAW: " ; Raw ; Spc(3) ; V ; "V" Wait 1 Loop End
-
Thread
C++ womit grafische Programmeirung
gut geschrieben sind. Ich bedanke mich bei allen für die Interessante Diksussion und freue mich,d as es weitesgehend sachlich zuging bis auf wenige Ausnahmen..was hier leider eher die <regel ist..das solche Kommentare dazwischen kommen.
: "No, let's face it. You fucked this up royally, and now you are trying to close all the bugs as fast as you can, so nobody sees just how much damage you have done. You, sir, are unprofessional and a disgrace to the gcc development team."
-
Thread
Probleme bei Java Syntaxchecker
Parse a "Klammerdarstellung" (KD) of a tree. * * <ul> * <li>An empty tree is encoded as '-'.</li> * <li>A node is encoded as an uppercase letter, i.e. everything accepted by {@link Character#isUpperCase(char)}.</li> * <li>Children are appended to the father as a ','-separated list
Parse a "Klammerdarstellung" (KD) of a tree. * * <ul> * <li>An empty tree is encoded as '-'.</li> * <li>A node is encoded as an uppercase letter, i.e. everything accepted by {@link Character#isUpperCase(char)}.</li> * <li>Children are appended to the father as a ','-separated list
-
Thread
LCD Befehl zu langsam in BASCOM
Txd_pullup Alias Portd.1 Rxd_enable Alias Ucsrb.rxen Rxd_pullup Alias Portd.0 Dim Rs232byte As Byte Dim R As Byte Dim I As Byte Dim Z As Byte Dim L As Byte Dim X As Byte Dim Taste As Byte Dim Text As String * 40 'Dim Rs232buffer(41) As Byte At Text Overlay Dim Oben As String * 17 Dim Unten As String * 17 R = 0 I = 0 Z = 0 L = 2 X = 0 Config Timer1 = Timer , Prescale = 1 'Konfiguriere Timer1 Enable Timer1 'schalte