-
Datei
lm75.c
enum position {in = 0x91, out = 0x93}; signed int Read_temp(position pos) { byte a, b; int data = 0; i2c_start(); i2c_write(pos); a = i2c_read(1); b = i2c_read(0); i2c_stop(); if (bit_test(a, 7)) { data = ~a; data++; return (-data); } else { data = a; } return data; }
-
Datei
lm75.c
functions #asm .equ __i2c_port=0x18 .equ __sda_bit=1 .equ __scl_bit=0 #endasm #include <i2c.h> // LM75 Temperature Sensor functions #include <lm75.h> // Declare your global variables here void main(void) { long wait; // Declare your local variables here // Input/Output Ports initialization // Port A
in „LM75 funktioniert nicht“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
LM75.c
usart.h" #include "usart.c" #include "i2cmaster.h" #include "twimaster.c" #define BAUD 51 #define LM75 0x90 int main(void) { void getTemperatur(void); volatile unsigned int time_counter_[7] = {0,0,0,0,0,0,0}; usartInit(BAUD); i2c_init(); // initTimer1(); while(1) { getTemperatur(); } } void getTemperatur(void) { char usartSendBuffer[100]; unsigned int data; // unsigned int lm75_data = 0; // unsigned int temo_data = 0; char LM92CIM_Temperatur1 = 0; char LM92CIM_Temperatur2 = 0; unsigned int return_value = 0; i2c_start_wait(LM75+I2C_READ); // set device address and write mode
in „LM75 auslesen“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
lm75.c
#include <stdio.h> #include <string.h> #include <unistd.h> #include <fcntl.h> #include <errno.h> #include <termios.h> #define P_ERROR -1 // to check for errors when dealing with the port int openPort(void); void closePort(int fd); void writeData(int fd, int nbytes); void readData(int fd, int nbytes); struct termios options; unsigned char sbuf[4]; // Stores data to be written unsigned char sbufr[4]; // Stores data to be read int main(int argc, char *argv[]) { int fd; fd = openPort(); if(fd > P_ERROR ) { sbuf[0] = 0x55; // read multible bytes sbuf[1] = 0x91; // Address slave and set bit 0 =1 sbuf
in „Devantech USB-I2C Adapter und LM75“ · Softwareentwicklung ·
-
Datei
LM75.c
#include "LM75.h" int16_t LM75gettemp(void){ int8_t low, high; int16_t temperature; I2Cstart(); I2Csend(LM75_ADDRESS); I2Csend(LM75_TEMPERATURE); I2Crestart(); I2Csend(LM75_ADDRESS|0x01); high=I2Creceive(I2C_ACK);
in „PIC18F97J60 und LM75“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
LM75.h
#ifndef LM75_H_ #define LM75_H_ #define LM75_ADDRESS 0x9E #define LM75_TEMPERATURE 0x00 #include <stdint.h> #include "I2C.h" int16_t LM75gettemp(void); #endif /* end of file */
in „PIC18F97J60 und LM75“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
lm75.c
#define NACK FALSE #define START 0x08 #define TW_MT_SLA_ACK 0x18 #define TW_MT_DATA_ACK 0x28 void lm75_read(void); void i2c_init(void); int i2c_send_start(uint8_t adress); int i2c_send_byte(uint8_t data); void i2c_send_stop(void); int i2c_read(uint8_t adress, uint8_t ackflag); struct TEMPERATUR { uint8
in „I²C Bus und LM75“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
LM75.pdf
stations, electronic test equipment, off■ Supply Voltage LM75A 2.7V to 5.5Va management is critical to performance. The LM75A, LM75B LM75B, LM75C 3.0V to 5.5Vl and LM75C are available in an SOP-8 pacakage. The LM75Burrent operating 280 μA (typ)W and LM75C are
-
PDF
LM75.pdf
Pointer Byte Ack Most Significant Data Byteck Least Significant Data ByteAck Cond Master by by by by by LM75 LM75 LM75 LM75 Master (f) T and T Write OS HYST Figure 2. Serial Port Operation http://onsemi.com 6 LM75 REGISTER SET AND PROGRAMMER’S MODEL Register (POINT), 8–bits, Write–only Pointer Register (POINT
in „TWI (I2C) Problem bekomme den TWI nicht ans laufen“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
lm75.pdf
www.national.com Connection Diagrams Ordering Information SO-8 Supply Order Number Voltage Supplied As LM75CIM-3 3.3V LM75CIMX-3 3.3V 2500 Units on Tape and Reel LM75CIM-5 5V TL/H/12658–2 Order Number LM75CIM-3, LM75CIMX-3, LM75CIMX-5 5V 2500 Units on Tape and Reel LM75CIM-5 or LM75CIMX-5 See NS Package Number
in „Arduino I2C Probleme Sonsoren werden manchmal nicht gefunden“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
LM75_UART.ASM
ldi r17,0b10010010 ; *** LM 75 mit Addr=1 ansprechen *** out TWDR,R17 ;Byte in Ausgaberegister ldi R16,(1<<TWINT)|(1<<TWEN) out TWCR,R16 ;Byte senden wait2: sbrs R16,TWINT ;Kommando ausgeführt? rjmp wait2 ;nein -> warten ldi r17,0b00000000 ; *** LM 75 Temperaturregister ansprechen *** out TWDR,R17 ;Byte in Ausgaberegister ldi R16,(1<<TWINT)|(1<<TWEN) out TWCR,R16 ;Byte senden wait3: sbrs R16,TWINT ;Kommando ausgeführt? rjmp wait3 ;nein -> warten
in „ATMega8 TWI“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
LM75_UART.ASM
ldi r17,0b10010010 ; *** LM 75 mit Addr=1 ansprechen *** out TWDR,R17 ;Byte in Ausgaberegister ldi R16,(1<<TWINT)|(1<<TWEN) out TWCR,R16 ;Byte senden wait2: in R16,TWCR ;Status holen sbrs R16,TWINT ;Kommando ausgeführt? rjmp wait2 ;nein -> warten ldi r17,0b00000000 ; *** LM 75 Temperaturregister ansprechen *** out TWDR,R17 ;Byte in Ausgaberegister ldi R16,(1<<TWINT)|(1<<TWEN) out TWCR,R16 ;Byte senden wait3: in R16,TWCR ;Status holen sbrs R16,TWINT ;Kommando ausgeführt?
in „ATMega8 TWI“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
lm75_anzeige.h
#ifndef _LM75_anzeige_INCLUDED_ #define _LM75_anzeige_INCLUDED_ #include <i2c.h> #include <lcd.h> #pragma used+ void lm75_auf_lcd(unsigned char chip, unsigned char x_pos, unsigned char y_pos) { char puffer[3]; //
-
Datei
lm75_anzeige.h
#ifndef _LM75_anzeige_INCLUDED_ #define _LM75_anzeige_INCLUDED_ #include <i2c.h> #include <lcd.h> #include <stdlib.h> #pragma used+ void lm75_auf_lcd(unsigned char chip, unsigned char x_pos, unsigned char y_pos)
-
Datei
LM75_Mega.asm
.include "m8def.inc" ;Definitionsdatei einbinden .def Data =R16 .def temp =R18 ;temporary storage register .def Txbyte =R19 ;Data to be transmitted .def Rxbyte =R20 ;Received data .def tmpdelay = r21 ;Used as: I2C Delay loop variable .org 0x0000 rjmp reset reset: ldi r16, low(RAMEND) out SPL, r16 ldi r16, high(RAMEND) out SPH, r16 sbi UCSRB,TXEN ;TX aktivieren ldi temp,12; 4800 Baud out UBRRL,temp ldi r16, (1<<URSEL)|(1<<USBS)|(3<<UCSZ0) out UCSRC,r16 ;init TWI ldi Data, 0xD0 ;Bit Rate Generator out TWBR, Data ;ldi Data, 0x00 ;Slave Address Register ;out TWAR, Data ldi temp,(1<<TWPS0)|(1<<TWPS1
in „Hardware I2C beim ATMega“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
simple_lm75.c
low-byte TWCR = (1<<TWINT) | (1<<TWSTO) | (1<<TWEN); return ret_val; } int main (void) { int16_t lm75_temp; int8_t whole_number_degrees; twi_init(); while (1) { lm75_temp = get_lm75_temp(LM75_ADR); if (lm75_temp & TW_ERROR_MSK) { /* There was an error in communication */ } else { //no error while reading the lm75 whole_number_degrees = lm75_temp >>8; lm75_temp >>=7; UDR0 = whole_number_degrees; } } }
in „LM75 an ATMega 8“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
LM75_-_TempSensor.PDF
Pointer Byte Ack Most Significant Data Byteck Least Significant Data ByteAck Cond Master by by by by by LM75 LM75 LM75 LM75 Master (f) T and T Write OS HYST Figure 2. Serial Port Operation http://onsemi.com 6 LM75 REGISTER SET AND PROGRAMMER’S MODEL Register (POINT), 8–bits, Write–only Pointer Register (POINT
in „LM75 mit MSP430F1611“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
twi-v1.c
#include "lcd.c" #define TWI_ADR 0x00 #define _TWINT 0b10000000 #define _TWEN 0b00000100 #define LM75_ADR 0b10010000 #define LM75_CONFIG 0b00000001 #define LM75_HYST 0b00000010 #define LM75_SET 0b00000011 #define LM75_TEMP 0b00000000 int main(void) { unsigned char ret1,ret2; unsigned char t[4]; ; wait_ms(200); lcd_init(); i2c_init(); // initialize I2C library // init LM75 i2c_start_wait(LM75_ADR+I2C_WRITE); i2c_write(LM75_CONFIG); // Config Register auswählen i2c_write(0); i2c_write(0); i2c_stop(); i2c_start_wait(LM75_ADR+I2C_WRITE); i2c_write(LM75_HYST); // Config Register
in „LM75 und LCD“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
twi-v1.c
#include "lcd.c" #define TWI_ADR 0x00 #define _TWINT 0b10000000 #define _TWEN 0b00000100 #define LM75_ADR 0b10010000 #define LM75_CONFIG 0b00000001 #define LM75_HYST 0b00000010 #define LM75_SET 0b00000011 #define LM75_TEMP 0b00000000 int main(void) { unsigned char ret1,ret2; unsigned char t[4]; ; wait_ms(200); lcd_init(); i2c_init(); // initialize I2C library // init LM75 i2c_start_wait(LM75_ADR+I2C_WRITE); i2c_write(LM75_CONFIG); // Config Register auswählen i2c_write(0); i2c_write(0); i2c_stop(); i2c_start_wait(LM75_ADR+I2C_WRITE); i2c_write(LM75_HYST); // Config Register
in „i2c und lm 75“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
LM75A_1.pdf
sensor and thermal Watchdog⊗ LM75A GENERAL DESCRIPTION FEATURES The LM75A is a temperature-to-digital converter using an on-chip Pin-for-pin replacement for industry standard LM75 and offers band-gap temperature sensor and Sigma-delta
in „LM 75 temperatur wird nicht aktualisiert“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
LM75_auslesen_2.txt
#include <msp430x16x.h> void main(void) { WDTCTL = WDTPW + WDTHOLD; // Stop watchdog P2SEL|=0x00; // Port2 als input output benutzten P1DIR|=0xFF; // Port1 sind die 8 LEDs P2DIR|=0xFF; //Port2 sind die Latschsignale für 7-Segment decoder P3SEL |= 0x0a; // Assign I2C pins to module P3OUT |= 0x05; //am Port3 Pin 1+3 auf High setzen (Latch Pins) // P1OUT = 0x00; U0CTL |= I2C + SYNC; // Switch USART0 to I2C mode U0CTL &= ~I2CEN; // Recommended I2C init procedure I2CTCTL = I2CSSEL_2; // SMCLK I2CSCLH = 0x03; // High period of SCL I2CSCLL = 0x03; // Low period of SCL I2CNDAT = 0x01; // Transmit one byte
in „LM75 mit MSP430F1611“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
EPM8722_LM75.C
//////////////////////////////////////////////////////////////////////////// //// Library for a LM75CIM3 Temperature chip //// //// //// //// init_temp(); Call before the other functions are used //// //// //// //// d = read_full_temp(); Read the temp in degrees * 8 //// //// //// //// NOTE: MULTIPLY
in „LM75 über PIC mit C abfragen“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
Master_Produktion_mit_Alarm.bas
As Single Dim Kreis5 As Single Dim Kreis6 As Single Dim Hightemp As Byte Dim Lowtemp As Byte Const Lm75slavewrite = &H90 Const Lm75slaveread = &H91 Dim Lm75high As Byte Dim Lm75low As Byte Dim Temperatur As Integer Dim Nachkommastelle As String * 2 Dim Display_eingang As Byte Dim I_o_eingang As Byte Dim
in „PCA 9554AD Ansteuerprobleme“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
Uhr_Thermometer.bas
-------- 'Konfiguration TWI/I²C '--------------------- Config Sda = Portc.4 Config Scl = Portc.5 'LM75-Adressen Const Lm75_schreiben = &H90 Const Lm75_lesen = &H91 'DS1307-Adresse Const Ds1307_schreiben = &HD0 Const Ds1307_lesen = &HD1 I2cinit '--------------------- 'Konfiguration Eingabe '----------
in „Bascom LM75 Schalttemperatur auslesen“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
main.c
include <avr/io.h> #include <avr/interrupt.h> #include <stdlib.h> #include "i2cmaster.h" #define ADDR_LM75 0b10011110 // Device ID 1001 , Device Adress 111, RW Platzhalter #include "uart.h" #define UART_BAUD_RATE 4800 // Baudrate int LM75_auslesen() { int rc = 0; int temp = 0; char buffer[20]; uart_puts(
in „I2C und lange Pausen zwischen den Bytes“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
IICTSUS.ASM
letzte Bit gibt an das der Sensor Daten entgegen nehmen soll (PIC schreibt in Sensor) call i2c_tx ; LM75 zum schreiben adressieren call i2c_getack ; ACK vom LM75 empfangen movlw 0 ; Point Register auf 0 setzen call i2c_tx ; Mit Point Register das Temp Register adressieren call i2c_getack ; ACK vom LM75
-
Datei
ATMega8-TWI-LM75.c
#include <avr/io.h> void main (void) { TWSR = 0; TWBR = 92; //100kHz bei 20MHz takt TWCR = (1<<TWINT)|(1<<TWSTA)|(1<<TWEN); //start while ((TWCR & (1<<TWINT)) == 0); //warten bis start erfolgt TWDR = 0x9E; //Adresse laden TWCR = (1<<TWINT) | (1<<TWEN); //Adresse senden while ((TWCR & (1<<TWINT)) == 0); //warten bis Adresse gesendet TWDR = 0x03; //Daten laden TWCR = (1<<TWINT) | (1<<TWEN); //Daten senden while ((TWCR & (1<<TWINT)) == 0); //warten bis Daten gesendet TWDR = 30; //Daten laden TWCR = (1<<TWINT) | (1<<TWEN); //Daten senden while ((TWCR & (1<<TWINT)) == 0); //warten bis Daten gesendet
in „ATMega8 und LM75 am TWI (I2C)“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
UARTProtokoll.c
--------------------------------------------------*/ case 5: /* Messung der Außen_Temperatur über LM75 */ lm75_measurement_temp = getTemp(0b10010001); break; /*-------------------------------------------------------------*/ case 102: /* Messung der Temperatur mit Kommastelle */ sht_measurement_temp =
in „Timer1 im CTC und LCD Probleme“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
einfach_1xtemp1xlcd_zum__ben.s
REG_SET,0b00000011 ;-------------------------------------------------------------------------- init_LM75: ldi r16,0 ldi r17,0 ldi r18,REG_CONFIG rcall setRegisterLM75 ldi r16,0 ldi r17,0 ldi r18,REG_CONFIG rcall setRegisterLM75 ret ;----------------------------------------------------------------------
in „Zwei Programme gleichzeitig“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
test.c
functions #asm .equ __i2c_port=0x12 ;PORTD .equ __sda_bit=3 .equ __scl_bit=4 #endasm #include <i2c.h> // LM75 Temperature Sensor functions #include <lm75.h> // Standard Input/Output functions #include <stdio.h> // Declare your global variables here int temp; void main(void) { // Declare your local variables
in „LM75 und UART“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
main.h
#define F_CPU 16000000 // CPU clock in Hz //#define adr1_w 0x40 // CPU clock in Hz //#define lm75_w 0x90 // Schreiben LM75 //#define lm75_r 0x91 // Lesen LM75 //#define slave_adresse 0b00110100
in „Taster Entprellung am Attiny 841 und Auswertung“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
main.h
#define F_CPU 16000000 // CPU clock in Hz #define adr1_w 0x40 // CPU clock in Hz //#define lm75_w 0x90 // Schreiben LM75 //#define lm75_r 0x91 // Lesen LM75 //#define slave_adresse 0b00110100
in „Taster Entprellung am Attiny 841 und Auswertung“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
main.h
#define F_CPU 16000000 // CPU clock in Hz #define adr1_w 0x40 // CPU clock in Hz //#define lm75_w 0x90 // Schreiben LM75 //#define lm75_r 0x91 // Lesen LM75 //#define slave_adresse 0b00110100 #define slave_adresse_1 0x1e // Slave Adresse schreiben #define slave_adresse_2 0x1f // Slave Adresse
in „I2C Bus und eDIP128 (Graphik Display)“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
temp_uf_lcd_u._uart_forum.s
--------------------------------------------------- mainloop: wdr ;---Temperatur -> r22:r21 rcall lm75GetTemp ;--- Ausgabe mov r16,r22 rcall uartPutChar rcall lcdZahl rcall lcdLine1 ;---Temperatur -> r22:r21 rcall lm75GetTemp ;--- Ausgabe mov r16,r22 rcall uartPutChar rcall lcdZahl rcall lcdLine2 ;--
in „Temperaturausgabe mit LM 75 u. UART“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
temperatur.c
Temperatursensors output_high(PIN_C3); output_high(PIN_C4); i2c_start(); i2c_write(0x92); //Adresse LM75+Write i2c_write(0x01); //Register 1(Configuration) i2c_write(0x00); //Wert 0 ins register schreiben i2c_stop(); } void get_temp(void) //Funktion die die Temperatur ausliest { //Und Daten richtig verknüpft
-
Datei
main.c
i2c_port=0x15 ;PORTC .equ __sda_bit=4 .equ __scl_bit=5 #endasm #include <i2c.h> #include <stdio.h> // LM75 Temperature Sensor functions #include <lm75.h> // Alphanumeric LCD Module functions #include <alcd.h> // Declare your global variables here char buf[33]; void main(void) { char sign; int temp; // Declare
in „myavr mk2-board und lm75“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
main.c
i2c_port=0x15 ;PORTC .equ __sda_bit=4 .equ __scl_bit=5 #endasm #include <i2c.h> #include <stdio.h> // LM75 Temperature Sensor functions #include <lm75.h> // Alphanumeric LCD Module functions #include <alcd.h> // Declare your global variables here char buf[33]; void main(void) { char sign; int temp; // Declare
in „Lm75 gibt konstant -0.5 grad zurück“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
I2C_QC_MC.txt
Mega328P_SPI_MCP4922.c * * Created: 08.01.2019 22:27:33 * Author : Paul */ #define F_CPU 8000000UL #define LM75 0x4F // device address of EEPROM 24C02, see datasheet #include <util/delay.h> #include <avr/io.h> //AVR Register und Konstantendefinitionen #include <avr/interrupt.h> //AVR Interrupt Vektoren #include
in „LM75 + AVR + I2C Lib pfleury will nicht“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
I2C_QC_MC.c
Mega328P_SPI_MCP4922.c * * Created: 08.01.2019 22:27:33 * Author : Paul */ #define F_CPU 8000000UL #define LM75 0x4F // device address of EEPROM 24C02, see datasheet #include <util/delay.h> #include <avr/io.h> //AVR Register und Konstantendefinitionen #include <avr/interrupt.h> //AVR Interrupt Vektoren #include
in „LM75 + AVR + I2C Lib pfleury will nicht“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
I_c.C
übernehmen // SSPIF = 0; // // // // // // // SSPBUF = 0x90; // // // // // // // while(!SSPIF); // LM75 Adresse SSPIF = 0; // // // // // // // SSPBUF = 0; // // // // // // // while(!SSPIF); // Temp addressieren SSPIF = 0; // // // // // // // PEN = 1; // // // // // // // while(!SSPIF); // Bus freigeben
in „Hilfe zu PIC16F877A und LM75, bekomme keine Verbindung“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
Temperatur.c
#define NACK FALSE #define START 0x08 #define TW_MT_SLA_ACK 0x18 #define TW_MT_DATA_ACK 0x28 void lm75_read(void); void i2c_init(void); int i2c_send_start(uint8_t adress); int i2c_send_byte(uint8_t data); void i2c_send_stop(void); int i2c_read(uint8_t adress, uint8_t ackflag); struct TEMPERATUR { uint8
in „LM75 mit Atmaga 8 auslesen und auf LCD ausgeben [c]“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
i2c_LM75_T0.c
/****************************** I2C_LM75_T0.C **************************** I2C-Schnittstelle für Temperaturfühler LM75 National Semiconductor Takterzeugung für scl mit Timer0 Mode 2 auf P1.1 Datenbusanschluß sda an P1.0 Überarbeitung des Beispielprogrammes
in „Suche Sourcecode für LM75“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
0513.asm
019E ;; 096 : rain = false bcf H'00C',4 ;; 097 : dry = 0 clrf H'018' if_14751_by: ; 01A0 ;; 101 : lm75_read_fdt( lm75_address, f, d, t ) -- get data from LM75. clrf H'01A' call _13432__vector bcf H'00C',1 btfsc H'00C',5 ass_14780_t: ; 01A4 bsf H'00C',1 ass_14780_f: ; 01A5 movf H'01B',w movwf H'013' movf
in „Jal compilieren“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
neu-0513.asm
019E ;; 096 : rain = false bcf H'00C',4 ;; 097 : dry = 0 clrf H'018' if_14751_by: ; 01A0 ;; 101 : lm75_read_fdt( lm75_address, f, d, t ) -- get data from LM75. clrf H'01A' call _13432__vector bcf H'00C',1 btfsc H'00C',5 ass_14780_t: ; 01A4 bsf H'00C',1 ass_14780_f: ; 01A5 movf H'01B',w movwf H'013' movf
in „Jal compilieren“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
84123_usb_i2c_km-2.pdf
am am Bus, dass dieser noch nicht für sie frei ist, sie müssen Beispiel des I²C-Temperatursensors LM75. weiter auf das Stopp-Signal warten. Dabei wird die Adresse aus einer festen Geräte-ID und ei- FürdenBetriebmehrererMasteramBusunddenBetriebun- ner variablen Adressierung (A0 bis A2) gebildet. Diese
in „Hygrosens I2C Tmp Modul antwortet nicht“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
techb_myethernet_de_en.pdf
..........32 5.3.2 Analogue inputs......................................32 5.3.3 Temperatursensor LM75.........................33 5.3.3 Temperature sensor LM75......................33 5.3.4 Byteweise Ein- / Ausgabe.......................33 5.3.4 Input / Output byte-by-byte .....................33 5.3.5
in „Ulrich Radigs TCP/IP Stack auf MyAvr, ENC startet immer neu, Soft Spi Problem“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
Capture.TXT
CLK : 20: 17: 5 CLK : 20: 17: 6 CLK : 20: 17: 7 CLK : 20: 17: 8 CLK : 20: 17: 9 CLK : 20: 17: 10 LM75: error in state 8 TWSR= 32 CLK : 20: 17: 11 CLK : 20: 17: 12 CLK : 20: 17: 13 CLK : 20: 17: 14 ARP : who has 192.168. 0. 6 tell 192.168. 0. 5 TCP : connection request. [OK] TCP : socket[ 0] ACK: 1 SEQ
in „winziger Webserver mit enc28j60+mega32“ · Mikrocontroller und Digitale Elektronik ·
-
Datei
I2C.txt
void LM75 () { char temperatur,temperatur2,berechnung; { i2c_start (); i2c_senden (0x90); i2c_senden (0x00); i2c_start (); i2c_senden (0x91); //adresse lm75, + startbedingung temperatur = i2c_empfang(); //empfang
in „Ausgabe EDIP240 über I2C will nicht so“ · Mikrocontroller und Digitale Elektronik ·
-
PDF
tempmess.pdf
SCL 1 SCL A0 6 VSS RA0 D1 3 SDA A1 5 ICDPWR C5 PIC16F84AP 2 A2 N GND 1 S0_SDA 3 OS 4 G X3 GND GND LM75AD GND 6 Pol MINI-DIN Buchse zum Anschluss der Temperatursensoren X1 Sensor 1 - Schaltung auf extra Platine - X4 ist das Anschlusskabel +5V GND 8 6 +5V SCL 5 3 SDA 5 IC3IC$1 Ansicht der Buchse von oben
-
Datei
Temp_Host.c
[ID*2]++; } } }*/ Byte=0xFF; if(Byte==0xFF) { Anzeige[ID*2+1]=0x10; Anzeige[ID*2] =0x10; } } void LM75(int8_t ID) { Slave= 0b10010001 | (ID&0x0E); flag=0; TWCR= 1<<TWEN | 1<<TWIE | 1<<TWINT | 1<<TWSTA; while(flag==0) { }; } ISR(TIMER0_OVF_vect) { cli(); aktSeg++; TCCR1B&= ~(1<<CS10); TCNT1= 0x0000; Segment
in „C, Variable 0xFF wird als !=0xFF erkannt?“ · Mikrocontroller und Digitale Elektronik ·