STK500 Firmware gesucht

Hi, hat evtl. jemand die Firmware v 1.2 für STK500?
Ich wollte WinAVR Benutzen, das geht leider mit der neusten Firmware
nicht. So, wie ich es verstanden habe.
------------------
#include <math.h>
#include <avr/io.h>
#define PB1     1
//############################################################
int main()
{
  DDRB=0b11111111;      //sind Ausgänge
  PORTB |= (1 << PB1);
}

--------------------

Wenn ich auf Programm gehe, bekomme ich folgende Fehlermeldung:
> "make.exe" program
avrdude -p atmega8515 -P com1     -c stk500    -U flash:w:main.hex

avrdude: please define PAGEL and BS2 signals in the configuration file
for part ATMEGA8515
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100%
0.01s

avrdude: Device signature = 0x1e9301
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: please define PAGEL and BS2 signals in the configuration file
for part ATMEGA8515
avrdude: reading input file "main.hex"
avrdude: input file main.hex auto detected as Intel Hex
avrdude: writing flash (110 bytes):

Writing | ################################################## | 100%
0.09s

avrdude: 110 bytes of flash written
avrdude: verifying flash memory against main.hex:
avrdude: load data flash data from input file main.hex:
avrdude: input file main.hex auto detected as Intel Hex
avrdude: input file main.hex contains 110 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100%
0.03s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x10 != 0xff
avrdude: verification error; content mismatch

avrdude done.  Thank you.

make.exe: *** [program] Error 1

> Process Exit Code: 2
> Time Taken: 00:02