Na bitte, wer sagt's denn! Hier in meinem Sauladen herrscht halt
Ordnung.
Anbei meine Reparaturanleitung wie ich nen ohnmächtigen Zigbee wieder
ins Leben zurückref.
Zigbee-Rettung
Zurückholen nach Device IO Konfig ohne serielle Schnittstelle
MODEM XBEE-PRO XBP24BSE
Modem Firmware Version: 21A7
Serial Number
13A200406CAFBF
Mit Sparkfun Breakout Board. Reset Taster mit 10kOhm gegen +3,3V
notwendig.
1.Exakt so machen wie beschrieben, auch "break"
Sometimes you have trouble talking to an XBee - perhaps the baud rate is
unknown, or the firmware within it disables the serial port. If you work
with the XBee AIO or DIO adapters, you will probably need to use this
procedure.
You can help XCTU reflash the XBee by manually activating the XBee
Bootloader.
Open an X-CTU Terminal Window
Change Baud to 115200
Assert/check DTR, De-assert/uncheck RTS, Assert/check Break
Hit the /RESET button on the XBee development board (example: XBIB)
De-assert/uncheck Break
Click mouse on the Terminal Window, then Type a ‘B’ and hit the
carriage return (the ‘B’ must be CAPS)
The XBee should return the Bootloader Menu that looks something like
this:
BILD:
http://www.digi.com/wiki/developer/index.php/Image:Xctu_bootloader_terminal.jpg
Without resetting or power cycling the XBee go to the Modem Config
Tab
Check ‘Always Update Firmware’ & select firmware you wish to load
Hit Write
If this procedure does not work, then perhaps your XBee (or development
board) is damaged.
2.
Registerkarte "PC Settings" -> 9600 baud, 8N1 -> Test Query ->kurz
warten
OK!
