meanwell rsp 2000-48

Did the device work bevor some event? What happended?

Try to start the power supply with a load, e.g. a light bulb. Some power 
supplies cannot start without load.

Have you tried to detach the external on/off control wires?

Do the 5V and 12V auxiliary outputs work properly? Are you sure that you 
did not overload them?

Did you connect the remote-sense lines as shown in the datasheet page 4?
https://cdn-reichelt.de/documents/datenblatt/D400/RSP_2000_XX.pdf

hello everybody!
thank everbody one more time for answer the topic message!
The psu work before on one fm power transmitter!
She stop work sudently (don´t gave 48 volts),but the interesting thing 
is that it turns on and the blowers working but it doesn't give the 48 
volts!
normally when she start the led on psu start red and pass later from 
green, that mean the psu on output gave 48 volts.
Actually she start up , the red led are on but not pass for green!

any sugestions??

anybody had the same problem before??

regards
peter

PMC schrieb:
> but the interesting thing is that it turns on and the blowers

I expect that the fans use the 12V auxiliary supply. Only the main 
output seems to be broken.

> any sugestions??

answer my questions. I did not ask them just for fun. I like to ensure 
that the device is connected and loaded properly, otherwise it cannot 
work.

Also tell us how much electronik know-how and what measurement equipment 
you have available. If it turns out, that the device is really broken, 
you need someone who has a lot of experience with switching power 
supplies. This size is not a toy - it is very dangerous.

Hello everybody!
Thank you one more time for your help!


The only thing i need is the electrical squematic from this PSU, because 
wihtout him , i think is very difficult try repair him!

I repair another PSU before , but with a electrical squematic, but 
repair this psu without electrical squematic is a adventure!

i only came here because because I thought someone had the same problem 
as mine before and could give your suggestion!

about the electrical squematic(Sr thomas W thank you very mutch for your 
help)i think the basic structure are the same, but even this electrical 
squematic when i apply zoom i cant see the components description!is 
good to try see the structure of the psu, but have the limitation i 
describe before!
I contact the meanwell, but nobody repond me!(as I thought)

like i said before , the psu start up, i not connect any load on V+ 
terminal, and i dont have 48 volts...the blowers working,like  Stefanus 
F said because they use the 12 volts of the auxiliary , but 48... 
nothing!

Any sugestion???