Projekt läuft nur richtig wenn es mit Keil MDK erstellt wurde

/**

  ******************************************************************************

  * @file    system_stm32f4xx.c

  * @author  MCD Application Team

  * @version V1.0.0

  * @date    30-September-2011

  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.

  *          This file contains the system clock configuration for STM32F4xx devices,

  *          and is generated by the clock configuration tool

  *          stm32f4xx_Clock_Configuration_V1.0.0.xls

  *             

  * 1.  This file provides two functions and one global variable to be called from 

  *     user application:

  *      - SystemInit(): Setups the system clock (System clock source, PLL Multiplier

  *                      and Divider factors, AHB/APBx prescalers and Flash settings),

  *                      depending on the configuration made in the clock xls tool. 

  *                      This function is called at startup just after reset and 

  *                      before branch to main program. This call is made inside

  *                      the "startup_stm32f4xx.s" file.

  *

  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used

  *                                  by the user application to setup the SysTick 

  *                                  timer or configure other parameters.

  *                                     

  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must

  *                                 be called whenever the core clock is changed

  *                                 during program execution.

  *

  * 2. After each device reset the HSI (16 MHz) is used as system clock source.

  *    Then SystemInit() function is called, in "startup_stm32f4xx.s" file, to

  *    configure the system clock before to branch to main program.

  *

  * 3. If the system clock source selected by user fails to startup, the SystemInit()

  *    function will do nothing and HSI still used as system clock source. User can 

  *    add some code to deal with this issue inside the SetSysClock() function.

  *

  * 4. The default value of HSE crystal is set to 25MHz, refer to "HSE_VALUE" define

  *    in "stm32f4xx.h" file. When HSE is used as system clock source, directly or

  *    through PLL, and you are using different crystal you have to adapt the HSE

  *    value to your own configuration.

  *

  * 5. This file configures the system clock as follows:

  *=============================================================================

  *=============================================================================

  *        Supported STM32F4xx device revision    | Rev A

  *-----------------------------------------------------------------------------

  *        System Clock source                    | PLL (HSE)

  *-----------------------------------------------------------------------------

  *        SYSCLK(Hz)                             | 168000000

  *-----------------------------------------------------------------------------

  *        HCLK(Hz)                               | 168000000

  *-----------------------------------------------------------------------------

  *        AHB Prescaler                          | 1

  *-----------------------------------------------------------------------------

  *        APB1 Prescaler                         | 4

  *-----------------------------------------------------------------------------

  *        APB2 Prescaler                         | 2

  *-----------------------------------------------------------------------------

  *        HSE Frequency(Hz)                      | 25000000

  *-----------------------------------------------------------------------------

  *        PLL_M                                  | 25

  *-----------------------------------------------------------------------------

  *        PLL_N                                  | 336

  *-----------------------------------------------------------------------------

  *        PLL_P                                  | 2

  *-----------------------------------------------------------------------------

  *        PLL_Q                                  | 7

  *-----------------------------------------------------------------------------

  *        PLLI2S_N                               | NA

  *-----------------------------------------------------------------------------

  *        PLLI2S_R                               | NA

  *-----------------------------------------------------------------------------

  *        I2S input clock                        | NA

  *-----------------------------------------------------------------------------

  *        VDD(V)                                 | 3.3

  *-----------------------------------------------------------------------------

  *        Main regulator output voltage          | Scale1 mode

  *-----------------------------------------------------------------------------

  *        Flash Latency(WS)                      | 5

  *-----------------------------------------------------------------------------

  *        Prefetch Buffer                        | OFF

  *-----------------------------------------------------------------------------

  *        Instruction cache                      | ON

  *-----------------------------------------------------------------------------

  *        Data cache                             | ON

  *-----------------------------------------------------------------------------

  *        Require 48MHz for USB OTG FS,          | Enabled

  *        SDIO and RNG clock                     |

  *-----------------------------------------------------------------------------

  *=============================================================================

  ****************************************************************************** 

  * @attention

  *

  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS

  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE

  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY

  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING

  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE

  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

  *

  * <h2><center>&copy; COPYRIGHT 2011 STMicroelectronics</center></h2>

  ******************************************************************************

  */

/** @addtogroup CMSIS

  * @{

  */

/** @addtogroup stm32f4xx_system

  * @{

  */  

/** @addtogroup STM32F4xx_System_Private_Includes

  * @{

  */

#include "stm32f4xx.h"

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_TypesDefinitions

  * @{

  */

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_Defines

  * @{

  */

/************************* Miscellaneous Configuration ************************/

/*!< Uncomment the following line if you need to use external SRAM mounted

     on STM324xG_EVAL board as data memory  */

/* #define DATA_IN_ExtSRAM */

/*!< Uncomment the following line if you need to relocate your vector Table in

     Internal SRAM. */

/* #define VECT_TAB_SRAM */

#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 

                                   This value must be a multiple of 0x200. */

/******************************************************************************/

/************************* PLL Parameters *************************************/

/* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N */

#define PLL_M      8

#define PLL_N      336

/* SYSCLK = PLL_VCO / PLL_P */

#define PLL_P      2

/* USB OTG FS, SDIO and RNG Clock =  PLL_VCO / PLLQ */

#define PLL_Q      7

/******************************************************************************/

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_Macros

  * @{

  */

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_Variables

  * @{

  */

  uint32_t SystemCoreClock = 168000000;

  __I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes

  * @{

  */

static void SetSysClock(void);

#ifdef DATA_IN_ExtSRAM

  static void SystemInit_ExtMemCtl(void); 

#endif /* DATA_IN_ExtSRAM */

/**

  * @}

  */

/** @addtogroup STM32F4xx_System_Private_Functions

  * @{

  */

/**

  * @brief  Setup the microcontroller system

  *         Initialize the Embedded Flash Interface, the PLL and update the 

  *         SystemFrequency variable.

  * @param  None

  * @retval None

  */

void SystemInit(void)

{

  /* FPU settings ------------------------------------------------------------*/

  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)

    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */

  #endif

  /* Reset the RCC clock configuration to the default reset state ------------*/

  /* Set HSION bit */

  RCC->CR |= (uint32_t)0x00000001;

  /* Reset CFGR register */

  RCC->CFGR = 0x00000000;

  /* Reset HSEON, CSSON and PLLON bits */

  RCC->CR &= (uint32_t)0xFEF6FFFF;

  /* Reset PLLCFGR register */

  RCC->PLLCFGR = 0x24003010;

  /* Reset HSEBYP bit */

  RCC->CR &= (uint32_t)0xFFFBFFFF;

  /* Disable all interrupts */

  RCC->CIR = 0x00000000;

#ifdef DATA_IN_ExtSRAM

  SystemInit_ExtMemCtl(); 

#endif /* DATA_IN_ExtSRAM */

  /* Configure the System clock source, PLL Multiplier and Divider factors, 

     AHB/APBx prescalers and Flash settings ----------------------------------*/

  SetSysClock();

  /* Configure the Vector Table location add offset address ------------------*/

#ifdef VECT_TAB_SRAM

  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */

#else

  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */

#endif

}

/**

   * @brief  Update SystemCoreClock variable according to Clock Register Values.

  *         The SystemCoreClock variable contains the core clock (HCLK), it can

  *         be used by the user application to setup the SysTick timer or configure

  *         other parameters.

  *           

  * @note   Each time the core clock (HCLK) changes, this function must be called

  *         to update SystemCoreClock variable value. Otherwise, any configuration

  *         based on this variable will be incorrect.         

  *     

  * @note   - The system frequency computed by this function is not the real 

  *           frequency in the chip. It is calculated based on the predefined 

  *           constant and the selected clock source:

  *             

  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)

  *                                              

  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)

  *                          

  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 

  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.

  *         

  *         (*) HSI_VALUE is a constant defined in stm32f4xx.h file (default value

  *             16 MHz) but the real value may vary depending on the variations

  *             in voltage and temperature.   

  *    

  *         (**) HSE_VALUE is a constant defined in stm32f4xx.h file (default value

  *              25 MHz), user has to ensure that HSE_VALUE is same as the real

  *              frequency of the crystal used. Otherwise, this function may

  *              have wrong result.

  *                

  *         - The result of this function could be not correct when using fractional

  *           value for HSE crystal.

  *     

  * @param  None

  * @retval None

  */

void SystemCoreClockUpdate(void)

{

  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;

  /* Get SYSCLK source -------------------------------------------------------*/

  tmp = RCC->CFGR & RCC_CFGR_SWS;

  switch (tmp)

  {

    case 0x00:  /* HSI used as system clock source */

      SystemCoreClock = HSI_VALUE;

      break;

    case 0x04:  /* HSE used as system clock source */

      SystemCoreClock = HSE_VALUE;

      break;

    case 0x08:  /* PLL used as system clock source */

      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N

         SYSCLK = PLL_VCO / PLL_P

         */    

      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;

      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;

      if (pllsource != 0)

      {

        /* HSE used as PLL clock source */

        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);

      }

      else

      {

        /* HSI used as PLL clock source */

        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);      

      }

      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;

      SystemCoreClock = pllvco/pllp;

      break;

    default:

      SystemCoreClock = HSI_VALUE;

      break;

  }

  /* Compute HCLK frequency --------------------------------------------------*/

  /* Get HCLK prescaler */

  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];

  /* HCLK frequency */

  SystemCoreClock >>= tmp;

}

/**

  * @brief  Configures the System clock source, PLL Multiplier and Divider factors, 

  *         AHB/APBx prescalers and Flash settings

  * @Note   This function should be called only once the RCC clock configuration  

  *         is reset to the default reset state (done in SystemInit() function).   

  * @param  None

  * @retval None

  */

static void SetSysClock(void)

{

/******************************************************************************/

/*            PLL (clocked by HSE) used as System clock source                */

/******************************************************************************/

  __IO uint32_t StartUpCounter = 0, HSEStatus = 0;

  /* Enable HSE */

  RCC->CR |= ((uint32_t)RCC_CR_HSEON);

  /* Wait till HSE is ready and if Time out is reached exit */

  do

  {

    HSEStatus = RCC->CR & RCC_CR_HSERDY;

    StartUpCounter++;

  } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT));

  if ((RCC->CR & RCC_CR_HSERDY) != RESET)

  {

    HSEStatus = (uint32_t)0x01;

  }

  else

  {

    HSEStatus = (uint32_t)0x00;

  }

  if (HSEStatus == (uint32_t)0x01)

  {

    /* Select regulator voltage output Scale 1 mode, System frequency up to 168 MHz */

    RCC->APB1ENR |= RCC_APB1ENR_PWREN;

    PWR->CR |= PWR_CR_VOS;

    /* HCLK = SYSCLK / 1*/

    RCC->CFGR |= RCC_CFGR_HPRE_DIV1;

    /* PCLK2 = HCLK / 2*/

    RCC->CFGR |= RCC_CFGR_PPRE2_DIV2;

    /* PCLK1 = HCLK / 4*/

    RCC->CFGR |= RCC_CFGR_PPRE1_DIV4;

    /* Configure the main PLL */

    RCC->PLLCFGR = PLL_M | (PLL_N << 6) | (((PLL_P >> 1) -1) << 16) |

                   (RCC_PLLCFGR_PLLSRC_HSE) | (PLL_Q << 24);

    /* Enable the main PLL */

    RCC->CR |= RCC_CR_PLLON;

    /* Wait till the main PLL is ready */

    while((RCC->CR & RCC_CR_PLLRDY) == 0)

    {

    }

    /* Configure Flash prefetch, Instruction cache, Data cache and wait state */

    FLASH->ACR = FLASH_ACR_ICEN |FLASH_ACR_DCEN |FLASH_ACR_LATENCY_5WS;

    /* Select the main PLL as system clock source */

    RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW));

    RCC->CFGR |= RCC_CFGR_SW_PLL;

    /* Wait till the main PLL is used as system clock source */

    while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS ) != RCC_CFGR_SWS_PLL);

    {

    }

  }

  else

  { /* If HSE fails to start-up, the application will have wrong clock

         configuration. User can add here some code to deal with this error */

  }

}

/**

  * @brief  Setup the external memory controller. Called in startup_stm32f4xx.s 

  *          before jump to __main

  * @param  None

  * @retval None

  */ 

#ifdef DATA_IN_ExtSRAM

/**

  * @brief  Setup the external memory controller.

  *         Called in startup_stm32f4xx.s before jump to main.

  *         This function configures the external SRAM mounted on STM324xG_EVAL board

  *         This SRAM will be used as program data memory (including heap and stack).

  * @param  None

  * @retval None

  */

void SystemInit_ExtMemCtl(void)

{

/*-- GPIOs Configuration -----------------------------------------------------*/

/*

 +-------------------+--------------------+------------------+------------------+

 +                       SRAM pins assignment                                   +

 +-------------------+--------------------+------------------+------------------+

 | PD0  <-> FSMC_D2  | PE0  <-> FSMC_NBL0 | PF0  <-> FSMC_A0 | PG0 <-> FSMC_A10 | 

 | PD1  <-> FSMC_D3  | PE1  <-> FSMC_NBL1 | PF1  <-> FSMC_A1 | PG1 <-> FSMC_A11 | 

 | PD4  <-> FSMC_NOE | PE3  <-> FSMC_A19  | PF2  <-> FSMC_A2 | PG2 <-> FSMC_A12 | 

 | PD5  <-> FSMC_NWE | PE4  <-> FSMC_A20  | PF3  <-> FSMC_A3 | PG3 <-> FSMC_A13 | 

 | PD8  <-> FSMC_D13 | PE7  <-> FSMC_D4   | PF4  <-> FSMC_A4 | PG4 <-> FSMC_A14 | 

 | PD9  <-> FSMC_D14 | PE8  <-> FSMC_D5   | PF5  <-> FSMC_A5 | PG5 <-> FSMC_A15 | 

 | PD10 <-> FSMC_D15 | PE9  <-> FSMC_D6   | PF12 <-> FSMC_A6 | PG9 <-> FSMC_NE2 | 

 | PD11 <-> FSMC_A16 | PE10 <-> FSMC_D7   | PF13 <-> FSMC_A7 |------------------+

 | PD12 <-> FSMC_A17 | PE11 <-> FSMC_D8   | PF14 <-> FSMC_A8 | 

 | PD13 <-> FSMC_A18 | PE12 <-> FSMC_D9   | PF15 <-> FSMC_A9 | 

 | PD14 <-> FSMC_D0  | PE13 <-> FSMC_D10  |------------------+

 | PD15 <-> FSMC_D1  | PE14 <-> FSMC_D11  |

 |                   | PE15 <-> FSMC_D12  |

 +-------------------+--------------------+

*/

   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */

  RCC->AHB1ENR   = 0x00000078;

  /* Connect PDx pins to FSMC Alternate function */

  GPIOD->AFR[0]  = 0x00cc00cc;

  GPIOD->AFR[1]  = 0xcc0ccccc;

  /* Configure PDx pins in Alternate function mode */  

  GPIOD->MODER   = 0xaaaa0a0a;

  /* Configure PDx pins speed to 100 MHz */  

  GPIOD->OSPEEDR = 0xffff0f0f;

  /* Configure PDx pins Output type to push-pull */  

  GPIOD->OTYPER  = 0x00000000;

  /* No pull-up, pull-down for PDx pins */ 

  GPIOD->PUPDR   = 0x00000000;

  /* Connect PEx pins to FSMC Alternate function */

  GPIOE->AFR[0]  = 0xc00cc0cc;

  GPIOE->AFR[1]  = 0xcccccccc;

  /* Configure PEx pins in Alternate function mode */ 

  GPIOE->MODER   = 0xaaaa828a;

  /* Configure PEx pins speed to 100 MHz */ 

  GPIOE->OSPEEDR = 0xffffc3cf;

  /* Configure PEx pins Output type to push-pull */  

  GPIOE->OTYPER  = 0x00000000;

  /* No pull-up, pull-down for PEx pins */ 

  GPIOE->PUPDR   = 0x00000000;

  /* Connect PFx pins to FSMC Alternate function */

  GPIOF->AFR[0]  = 0x00cccccc;

  GPIOF->AFR[1]  = 0xcccc0000;

  /* Configure PFx pins in Alternate function mode */   

  GPIOF->MODER   = 0xaa000aaa;

  /* Configure PFx pins speed to 100 MHz */ 

  GPIOF->OSPEEDR = 0xff000fff;

  /* Configure PFx pins Output type to push-pull */  

  GPIOF->OTYPER  = 0x00000000;

  /* No pull-up, pull-down for PFx pins */ 

  GPIOF->PUPDR   = 0x00000000;

  /* Connect PGx pins to FSMC Alternate function */

  GPIOG->AFR[0]  = 0x00cccccc;

  GPIOG->AFR[1]  = 0x000000c0;

  /* Configure PGx pins in Alternate function mode */ 

  GPIOG->MODER   = 0x00080aaa;

  /* Configure PGx pins speed to 100 MHz */ 

  GPIOG->OSPEEDR = 0x000c0fff;

  /* Configure PGx pins Output type to push-pull */  

  GPIOG->OTYPER  = 0x00000000;

  /* No pull-up, pull-down for PGx pins */ 

  GPIOG->PUPDR   = 0x00000000;

/*-- FSMC Configuration ------------------------------------------------------*/

  /* Enable the FSMC interface clock */

  RCC->AHB3ENR         = 0x00000001;

  /* Configure and enable Bank1_SRAM2 */

  FSMC_Bank1->BTCR[2]  = 0x00001015;

  FSMC_Bank1->BTCR[3]  = 0x00010603;

  FSMC_Bank1E->BWTR[2] = 0x0fffffff;

/*

  Bank1_SRAM2 is configured as follow:

  p.FSMC_AddressSetupTime = 3;

  p.FSMC_AddressHoldTime = 0;

  p.FSMC_DataSetupTime = 6;

  p.FSMC_BusTurnAroundDuration = 1;

  p.FSMC_CLKDivision = 0;

  p.FSMC_DataLatency = 0;

  p.FSMC_AccessMode = FSMC_AccessMode_A;

  FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;

  FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;

  FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_PSRAM;

  FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b;

  FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;

  FSMC_NORSRAMInitStructure.FSMC_AsynchronousWait = FSMC_AsynchronousWait_Disable;  

  FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;

  FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;

  FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;

  FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;

  FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;

  FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;

  FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;

  FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;

  FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;

*/

}

#endif /* DATA_IN_ExtSRAM */

/**

  * @}

  */

/**

  * @}

  */

/**

  * @}

  */    

/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/