Hallo zusammen,
Ich wollte mein Zigbit Modul Mit dem Olimex AVR-JTAG-USB (ist ein jtag
ice mk1 clone) programieren. Meine selbst programmierten files konnte
ich weder mit avrdude noch mit avrStudio schreiben.
avrdude ausgabe:
1 | avrdude -c jtag1 -P /dev/tty.usbserial-A3000SMQ -p m1281 -U flash:w:Blinktest.rom:r -D
|
2 |
|
3 | avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
|
4 | avrdude: AVR device initialized and ready to accept instructions
|
5 |
|
6 | Reading | ################################################## | 100% 0.05s
|
7 |
|
8 | avrdude: Device signature = 0x1e9704
|
9 | avrdude: reading input file "Blinktest.rom"
|
10 | avrdude: writing flash (306 bytes):
|
11 |
|
12 | Writing | ################################################## | 100% 0.35s
|
13 |
|
14 | avrdude: 306 bytes of flash written
|
15 | avrdude: verifying flash memory against Blinktest.rom:
|
16 | avrdude: load data flash data from input file Blinktest.rom:
|
17 | avrdude: input file Blinktest.rom contains 306 bytes
|
18 | avrdude: reading on-chip flash data:
|
19 |
|
20 | Reading | ################################################## | 100% 0.22s
|
21 |
|
22 | avrdude: verifying ...
|
23 | avrdude: verification error, first mismatch at byte 0x0000
|
24 | 0x0c != 0x00
|
25 | avrdude: verification error; content mismatch
|
26 |
|
27 | avrdude: safemode: Fuses OK
|
ich hatte allerdings zu beginn eine Sicherung des Flash und eeproms
ausgelesen. Wenn ich diese zurückspiele kommt es zu keiner
Fehlermeldung.
1 | avrdude -c jtag1 -P /dev/tty.usbserial-A3000SMQ -p m1281 -U flash:w:../../sicherung-zigbit/flash.raw:r
|
2 |
|
3 | avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
|
4 | avrdude: AVR device initialized and ready to accept instructions
|
5 |
|
6 | Reading | ################################################## | 100% 0.05s
|
7 |
|
8 | avrdude: Device signature = 0x1e9704
|
9 | avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
|
10 | To disable this feature, specify the -D option.
|
11 | avrdude: erasing chip
|
12 | avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
|
13 | avrdude: reading input file "../../sicherung-zigbit/flash.raw"
|
14 | avrdude: writing flash (131072 bytes):
|
15 |
|
16 | Writing | ################################################## | 100% 32.76s
|
17 |
|
18 | avrdude: 131072 bytes of flash written
|
19 | avrdude: verifying flash memory against ../../sicherung-zigbit/flash.raw:
|
20 | avrdude: load data flash data from input file ../../sicherung-zigbit/flash.raw:
|
21 | avrdude: input file ../../sicherung-zigbit/flash.raw contains 131072 bytes
|
22 | avrdude: reading on-chip flash data:
|
23 |
|
24 | Reading | ################################################## | 100% 29.15s
|
25 |
|
26 | avrdude: verifying ...
|
27 | avrdude: 131072 bytes of flash verified
|
28 |
|
29 | avrdude: safemode: Fuses OK
|
Hat jemand ne Idee woran das liegen kann?
Grüsse Johannes
