PiPico-VsCode-GDB file not found

Cortex-Debug: VSCode debugger extension version 1.12.1 git(652d042). Usage info: https://github.com/Marus/cortex-debug#usage

"configuration": {

    "name": "Pico Debug (Cortex-Debug)",

    "cwd": "C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/scripts",

    "executable": "c:/Rudis/Rubelroller/Electronik/Schweisstrafo/Sps2/build/Sps2.elf",

    "request": "launch",

    "type": "cortex-debug",

    "servertype": "openocd",

    "serverpath": "C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/openocd.exe",

    "gdbPath": "C:\\Users\\RS\\.pico-sdk\\toolchain\\14_2_Rel1\\bin\\arm-none-eabi-gdb",

    "device": "RP2040",

    "configFiles": [

        "raspberrypi-swd.cfg",

        "target/rp2040.cfg"

    ],

    "svdFile": "C:\\Users\\RS/.pico-sdk/sdk/2.1.1/src/rp2040/hardware_regs/RP2040.svd",

    "runToEntryPoint": "main",

    "overrideLaunchCommands": [

        "monitor reset init",

        "load \"c:/Rudis/Rubelroller/Electronik/Schweisstrafo/Sps2/build/Sps2.elf\""

    ],

    "openOCDLaunchCommands": [

        "adapter speed 5000"

    ],

    "showDevDebugOutput": "raw",

    "__configurationTarget": 6,

    "gdbServerConsolePort": 55878,

    "pvtAvoidPorts": [],

    "chainedConfigurations": {

        "enabled": false

    },

    "debuggerArgs": [],

    "swoConfig": {

        "enabled": false,

        "decoders": [],

        "cpuFrequency": 0,

        "swoFrequency": 0,

        "source": "probe"

    },

    "rttConfig": {

        "enabled": false,

        "decoders": []

    },

    "graphConfig": [],

    "preLaunchCommands": [],

    "postLaunchCommands": [],

    "preAttachCommands": [],

    "postAttachCommands": [],

    "preRestartCommands": [],

    "postRestartCommands": [],

    "preResetCommands": [],

    "postResetCommands": [],

    "searchDir": [],

    "toolchainPrefix": "arm-none-eabi",

    "extensionPath": "c:/Users/RS/.vscode/extensions/marus25.cortex-debug-1.12.1",

    "registerUseNaturalFormat": true,

    "variableUseNaturalFormat": true,

    "pvtVersion": "1.12.1",

    "__sessionId": "377da438-4513-472d-a8bf-b65d1f4ebec4",

    "pvtShowDevDebugOutput": "raw"

}

Reading symbols from c:/users/rs/.pico-sdk/toolchain/14_2_rel1/bin/arm-none-eabi-objdump --syms -C -h -w c:/Rudis/Rubelroller/Electronik/Schweisstrafo/Sps2/build/Sps2.elf

Reading symbols from c:/users/rs/.pico-sdk/toolchain/14_2_rel1/bin/arm-none-eabi-nm --defined-only -S -l -C -p c:/Rudis/Rubelroller/Electronik/Schweisstrafo/Sps2/build/Sps2.elf

Launching GDB: "C:\\Users\\RS\\.pico-sdk\\toolchain\\14_2_Rel1\\bin\\arm-none-eabi-gdb" -q --interpreter=mi2

1-gdb-version

Launching gdb-server: "C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/openocd.exe" -c "gdb_port 50000" -c "tcl_port 50001" -c "telnet_port 50002" -s "C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/scripts" -f "c:/Users/RS/.vscode/extensions/marus25.cortex-debug-1.12.1/support/openocd-helpers.tcl" -f raspberrypi-swd.cfg -f target/rp2040.cfg -c "adapter speed 5000"

    Please check TERMINAL tab (gdb-server) for output from C:\Users\RS/.pico-sdk/openocd/0.12.0+dev/openocd.exe

Finished reading symbols from objdump: Time: 31 ms

-> =thread-group-added,id="i1"

-> ~"GNU gdb (Arm GNU Toolchain 14.2.Rel1 (Build arm-14.52)) 15.2.90.20241130-git\n"

-> ~"Copyright (C) 2024 Free Software Foundation, Inc.\n"

-> ~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law."

-> ~"\nType \"show copying\" and \"show warranty\" for details.\n"

-> ~"This GDB was configured as \"--host=i686-w64-mingw32 --target=arm-none-eabi\".\n"

-> ~"Type \"show configuration\" for configuration details.\n"

-> ~"For bug reporting instructions, please see:\n"

-> ~"<https://bugs.linaro.org/>.\n"

-> ~"Find the GDB manual and other documentation resources online at:\n    <"

-> ~"http://www.gnu.org/software/gdb/documentation/>.\n\n"

-> ~"For help, type \"help\".\n"

-> ~"Type \"apropos word\" to search for commands related to \"word\".\n"

-> 1^done

2-gdb-set mi-async on

Finished reading symbols from nm: Time: 41 ms

OpenOCD: GDB Server Quit Unexpectedly. See gdb-server output in TERMINAL tab for more details.

"C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/openocd.exe" -c "gdb_port 50000" -c "tcl_port 50001" -c "telnet_port 50002" -s "C:\\Users\\RS/.pico-sdk/openocd/0.12.0+dev/scripts" -f "c:/Users/RS/.vscode/extensions/marus25.cortex-debug-1.12.1/support/openocd-helpers.tcl" -f raspberrypi-swd.cfg -f target/rp2040.cfg -c "adapter speed 5000"

Open On-Chip Debugger 0.12.0+dev-gebec950-dirty (2024-09-27-16:29)

Licensed under GNU GPL v2

For bug reports, read

        http://openocd.org/doc/doxygen/bugs.html

CDLiveWatchSetup

embedded:startup.tcl:28: Error: Can't find raspberrypi-swd.cfg in procedure 'script' at file "embedded:startup.tcl", line 28