Kein CLOCKOUT PIC16F1827

// CONFIG1

#pragma config FOSC = INTOSC    // Oscillator Selection (INTOSC oscillator: I/O function on CLKIN pin)

#pragma config WDTE = OFF       // Watchdog Timer Enable (WDT disabled)

#pragma config PWRTE = OFF      // Power-up Timer Enable (PWRT disabled)

#pragma config MCLRE = ON       // MCLR Pin Function Select (MCLR/VPP pin function is MCLR)

#pragma config CP = OFF         // Flash Program Memory Code Protection (Program memory code protection is disabled)

#pragma config CPD = OFF        // Data Memory Code Protection (Data memory code protection is disabled)

#pragma config BOREN = ON       // Brown-out Reset Enable (Brown-out Reset enabled)

#pragma config CLKOUTEN = ON    // Clock Out Enable (CLKOUT function is enabled on the CLKOUT pin)

#pragma config IESO = ON        // Internal/External Switchover (Internal/External Switchover mode is enabled)

#pragma config FCMEN = ON       // Fail-Safe Clock Monitor Enable (Fail-Safe Clock Monitor is enabled)

// CONFIG2

#pragma config WRT = OFF        // Flash Memory Self-Write Protection (Write protection off)

#pragma config PLLEN = ON       // PLL Enable (4x PLL enabled)

#pragma config STVREN = ON      // Stack Overflow/Underflow Reset Enable (Stack Overflow or Underflow will cause a Reset)

#pragma config BORV = LO        // Brown-out Reset Voltage Selection (Brown-out Reset Voltage (Vbor), low trip point selected.)

#pragma config LVP = ON         // Low-Voltage Programming Enable (Low-voltage programming enabled)

// #pragma config statements should precede project file includes.

// Use project enums instead of #define for ON and OFF.

#include <xc.h>

void main(void) {

    while(1);

}