Hallo, habe folgendes Problem: Habe vor etwa 3 Jahren programmiert (Atmega) udn habe dazu stets den Progger hier aus dem Shop genommen für den Parallelport... Nun möchte ich wieder damit anfangen, habe aber das Problem dass ich nur noch einen Laptop habe. der nur noch USB hat. Es gibt ja sogenannte wandler, von usb nach parallel, aber da sollen ja nicht alle dafür taugen? Ist da was dran? Vorallem bei ALDI/HOFER gibts ja derzeit so eine "docking station", also von USB auf Parallel, sowie Seriell... Meint ihr das ganze würde funktionieren damit ich meinen Progger am laptop wieder zum laufen bringe? würde mich freuen wenn mir jemand helfen könnte, danke!! mfg, thomas
die standard konverter übersetzen nur druckerprotokolle und meistens ist es nicht möglich den parallelport direkt zu kontrollieren so wie es der ISP progger macht. Du brauchst schon sowas hier: http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/ Aber ich glaube selbst damit besteht die Möglichkeit das es nicht funktioniert (wegen timing denke ich mal).
Hi oder aber gleich einen USB Programmieradapter verwenden. Hier im Wiki sind eingige (darunter auch meiner) aufgelistet. Matthias
USB->Parallelport-Umbumser funktionieren nur mit Druckern, das kann ich (leider) bestätigen. Die einzige Möglichkeit die sich mir nach meinem Laptop-Kauf bot, war der Erwerb einer PCMCIA-Karte von transcend für etwa 80 EUR. www.transdigital.net Meines Wissens ist das die einzige PCMCIA Karte die einen vollwertigen Parallelport darstellt.
Notebook PC user has following choices to connect the parallel device using: Low cost USB to Parallel Adapter cable - Converter Cable. Low cost PCMCIA Card (true EPP Port) - Koutech IO-CBP220 which is dual USB card with built in USB to Parallel converters. Both of the above solutions emulate the parallel port only. They are not real parallel ports and provide very limited parallel port functionality. The USB to parallel converters will not work with applications which require direct access to the parallel port registers: Data acquisition, JTAG programmers, software protection dongles etc. The USB to parallel converter hardware requires special drivers and must be driven by Windows XP or 2000 to support USB over the CardBus. The EPP PCMCIA Parallel card Note that EPP standard was developed in late 80-ties to speed up the parallel port with PCs running at that time at 12 or 16 MHz. With today's Notebook PCs running over 100 times faster the EPP is obsolete and is mainly used for marketing purposes only. The EPP old standard over last 6 years is not any more supported by Microsoft and major PC manufacturers. And the ultimate solution... The Trans PC Card - Universal Parallel Port PCMCIA card. The card we offer here is a real parallel port, mapped to the standard port I/O addresses. It is driven by Microsft drivers of Windows, so there is no need for additional installation/drivers software. The card shows up in the Device Manger as a parallel port LPT1, LPT2 or LPT3. Therefore it is compatible with all parallel devices which can be driven by the fixed parallel ports of desktop PCs. The card may be used in DOS with provided card enabler or with Linux operating systems.
Hi das was auf http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/ vorgestellt wird sollte auch für Applikationen funktionieren die direkt auf die HArdware wollen da der Treiber solcherlei Zugriffe abfängt und über den USB weiterleitet. Ob das dann aber schnell und zuverlässig ist ist ein anderer Punkt. Matthias
Bitte melde dich an um einen Beitrag zu schreiben. Anmeldung ist kostenlos und dauert nur eine Minute.
Bestehender Account
Schon ein Account bei Google/GoogleMail? Keine Anmeldung erforderlich!
Mit Google-Account einloggen
Mit Google-Account einloggen
Noch kein Account? Hier anmelden.